Electronic Design

  
Reprints     Printer-Friendly    Email this Article    RSS        Font Size     What's This?


[TechView: Analog & Power]
Thermally Enhanced MOSFET Line Gets A Breakdown-Voltage Boost

Don Tuite  |   ED Online ID #14230  |   December 15, 2006


Applications that often require MOSFETs with 200-V breakdown ratings include high-powered (up to 1000-W) class D audio amps, 48-V output ac-dc supplies (for synchronous rectification), brushless dc-motor drives (up to 1 hp), and isolated dc-dc converters operating from a universal input range (36 to 75 V). To deal with those applications, International Rectifier s first DirectFET-packaged MOSFET offers a 200-V breakdown voltage rating. Previous DirectFET MOSFETs offered a maximum breakdown voltage of 150 V.

IR introduced the DirectFET package in 2002. In the DirectFET, solderable pads on the chip enable the die to be directly attached to a pc board for bottom-side cooling. At the same time, a copper drain clip on the top of the package permits top-side cooling.

The advantage of the proprietary DirectFET package is low thermal resistance between the die and the top and bottom of the package. In the case of the new IRF6641TRPbF, this makes it possible to design for a case temperature 13°C lower than an equivalent part in an enhanced SO-8 package or to increase power by 33% while running at the same case temperature.

The MOSFET device in the package provides 59.9-mΩ guaranteed-maximum RDS(ON) and 34-nC (typical) gate charge. The package and the chip make a potent combination. In tests, IR ran the IRF6641TRPBF and other enhanced SO-8 devices in the same secondary-side synchronous rectification sockets and measured 0.4% efficiency improvement (95% at 7 A) when single devices were compared. Tests also showed efficiency parity when a single DirectFET part was compared to a pair of devices in separate enhanced SO-8 packages.

The IRF6641TRPbF costs $1.24 each in 10,000-unit lots. The new device comes in the standard MZ dimensions.

International Rectifier
www.irf.com

See Associated Figure


Reprints   Printer-Friendly  Email this Article  RSS    Font Size   What's This?


  • C Tools Accelerate HDV Development On Xilinx FPGAs
  • A New Design Inflection Point
  • Forecasting Industry Growth For 2009 And Beyond
  • EDA Retools To Exploit Multicore Architectures
  • Design And Verification Move Up In Abstraction
  • EDA Retools To Exploit Multicore Architectures
  • A New Design Inflection Point
  • Design And Verification Move Up In Abstraction
    1) Transportation Guidelines For Lithium Batteries Get Updated
    (1404 views today)
    2) Build A Smart Battery Charger Using A Single-Transistor Circuit
    (295 views today)
    3) WHITE PAPER: Liquid-Level Monitoring Using a Pressure Sensor
    (264 views today)
    4) 1-A Switching Regulators Operate With 96% Efficiency To Replace Linear Regulators
    (166 views today)
    5) The Field Of Energy Harvesting Begins To Ripen
    (107 views today)
    ALL TOP 20



    POST YOUR COMMENTS HERE
    Name:

    Email:
    Your Comments:

    Enter the text from the image below


    Please refresh the page if you have trouble reading this text.

    Search Electronic Design
         
      
     
    Email Newsletter
    Sponsored By:
    The Find Power Products monthly newsletter brings you the most important new developments within the world of power design. The newsletter includes exerpts from industry leader Sam Davis's exclusive blog, as well as overviews of the latest new products.

    Enter Email to Subscribe
      
    Web Seminar
    Sponsored By:
    Title: Exploring How Good GUIs Drive Adoption in the Digital Power Management Space
    Speakers: Don Tuite Deepak Savadaatt
    Date: 10/24/07
    Register: 

    Electronic Design Europe Electronic Design China EEPN Power Electronics Auto Electronics Microwaves & RF
    Mobile Dev & Design Schematics Find Power Products Military Electronics EE Events Related Resources