William Wong
|
ED Online ID #15266 |
April 4, 2007
Kits and modules can give you a jump on the competition especially when you can get them ready to go from Digi. Their Digi JumpStart Kits can handle Linux, Windows CE Embedded 6.0 and NET+OS. NET+OS is now supported by the Eclipse-based Digi ESP integrated development environment (IDE).
These network platforms use the Digi Connect and ConnectCore modules. The Digi Connect ME (Fig. 1) is one example that provides wired connectivity. The same form factor works for wireless as well. Kits start at $399. They include a USB debugger as well as the ESP IDE. Everything is ready to go out of the box.
Digi has been on a buying spree the past few years and some of their compatriots were at ESC as well. Rabbit Semiconductor was showing off their Wireless Control Application Kit (Fig. 2). This is based on a pair of 900MHz or 2.4GHz wireless modules from MaxStream. The systems also highlight Rabbit’s low-EMI Rabbit 3000 found on the kit’s LP3500 board.
The LP3500 draws less than 100 <μA in power save mode. It has 26 industrialized I/O, 8 A/D inputs with programmable gain, 6 serial ports plus keyboard and display support. The wireless modules provide transfer rates up to 38.4Kbits/s with a range up to 3 miles (outdoors). A Modbus PC application example allows provides a quick way to build control and monitoring applications.
Dear Sir/Ma'am I want to purchase 8051 Development kit. I am living in Delhi. So can you tell me the address where i can purchase 8051 development kit. I will thankfull to you. Thankyou With regards Suhail Ahmad Khan 9313173878
Suhail Ahmad Khan -October 09, 2008
Your Comments:
Enter the text from the image below
Please refresh the page if you have trouble reading this text.
Search Electronic Design
Web Seminar
Sponsored By:
Title: Read Pacing: A Performance Enhancing Feature of PCI Express Gen 2 Switch Devices
Reprints
