Texas Instruments
The DLP5531-Q1 DLP chipset from Texas Instruments uses a core array of MEMS-based micromirrors to dynamically steer auto headlights and so improve road visibility while reducing glare and unwanted reflections.
The DLP5531-Q1 DLP chipset from Texas Instruments uses a core array of MEMS-based micromirrors to dynamically steer auto headlights and so improve road visibility while reducing glare and unwanted reflections.
The DLP5531-Q1 DLP chipset from Texas Instruments uses a core array of MEMS-based micromirrors to dynamically steer auto headlights and so improve road visibility while reducing glare and unwanted reflections.
The DLP5531-Q1 DLP chipset from Texas Instruments uses a core array of MEMS-based micromirrors to dynamically steer auto headlights and so improve road visibility while reducing glare and unwanted reflections.
The DLP5531-Q1 DLP chipset from Texas Instruments uses a core array of MEMS-based micromirrors to dynamically steer auto headlights and so improve road visibility while reducing glare and unwanted reflections.

MEMS Micromirror Chipset Drives Steerable Auto Headlights

Jan. 23, 2018
Texas Instruments has announced the DLP5531 chipset based on its DLP MEMS micromirror assembly as its core, which can be used to dynamically steer a car’s headlights depending on circumstances and setting to enhance a driver’s visibility.

The pivoting, self-steering headlight of Preston Tucker’s legendary 1948 car (only 51 were built) may be coming back, but using a very different technology. Unlike the mechanical linkage his Tucker Torpedo usedTexas Instruments has announced a MEMS-based approach using its proprietary digital light projector (DLP) technology (Fig. 1). This is yet another example of MEMS technology being applied to many diverse roles in the vehicle, a trend which started with airbag impact sensors, expanded to accelerometers for rollover detection, and now is used in gyroscopes and accelerometers for navigation IMUs (inertial measurement units).

Introduced at CES, TI’s DLP5531-Q1 DLP chipset for steerable headlight systems offers full programmability along with high resolution of more than one million addressable pixels per headlight—a figure which exceeds the resolution of existing adaptive driving beam (ADB) technologies by more than four orders of magnitude. It is targeted at enabling headlight systems that maximize brightness for drivers on the road while minimizing the glare to oncoming traffic or reflections from retroreflective traffic signs. Further, as a passive reflecting-mirror approach, it can be used with any light source, including LED and laser illumination, thus giving engineers a way to more precisely control light distribution on the road with customizable beam patterns.

DLP technology, introduced in 1996, consists of an array of highly reflective aluminum micromirrors forming a digital micromirror device (DMD); each such device contains up to 8 million individually controlled micromirrors built on top of an associated CMOS memory cell. This electrical-input, optical-output MEMS device is used as a high-speed, efficient, and reliable spatial light modulator. The micromirrors are individually tilted via electrostatic deflection to steer imping light, transitioning between hard stops at two angles of either ±12° or ±17°, depending on the selected DMD. The switching rate of the micromirrors can range up to 10,000 times per second. A complete chipset consists of the DMD, driver, support circuitry, and processor (Fig. 2).

The use of DLP technology for automobile adaptive driving beam implementations is yet another example of an innovation finding new applications, often acting as a building block beyond the original intention, as explained dramatically in James Burke’s insightful and thought-provoking, still-relevant 1978 TV series and book Connections. DLP was originally envisioned as the core of a video-projection technology and is now used for both large-size theater systems and handheld picoprojectors; it is also being designed into heads-up displays (HUDs), as well as in vehicles and aircraft, 3D printers, and even scientific instruments such as spectrometers.

However, adaptive driving beam designs were not at the top-tier original applications list, yet DLP is proving to be an attractive solution to this application challenge, which also requires that components meet the stringent automotive standards for operation despite harsh temperature, vibration, electrical transients, and other conditions. TI says that lead customers are already sampling and designing with the DLP5531-Q1 chipset for high-resolution headlight systems. The chipset will be more broadly available in the second half of 2018.

Sponsored Recommendations

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

How to Quickly Leverage Bluetooth AoA and AoD for Indoor Logistics Tracking

March 27, 2024
Real-time asset tracking is an important aspect of Industry 4.0. Various technologies are available for deploying Real-Time Location.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!