PCM CODECs Keep S/N Ratios Low In Portable Communications Applications

Feb. 1, 1999
Well-suited for digital cellular telephones such as GSM, CDMA and TDMA and other portable communications applications, the BU8731KV and BU8733KV linear PCM CODEC ICs have a signal-to-noise ratio that's said to be better than many other such devices.

Well-suited for digital cellular telephones such as GSM, CDMA and TDMA and other portable communications applications, the BU8731KV and BU8733KV linear PCM CODEC ICs have a signal-to-noise ratio that's said to be better than many other such devices. Typical operating current for the BU8733KV is 5.4 mA, while 8 mA is typical for the BU8731KV. Both ICs draw just 0.1 µA in standby mode, and individual blocks in the chips can be powered down when not in use. Features include a 14-bit linear or µ/A-law CODEC, an on-board DTMF and tone-generating melodies for the ringer. The DTMF and tone-generator functions are designed to off-load the system DSP. The DSP interface of the BU8733KV is compatible with all major DSPs. The system clock for both ICs is generated from an 8 kHz frame synchronous signal as part of the PLL unit. In the BU8731KV, the PCM data-transfer clock can be adjusted externally between 64 kHz (128-kHz linear) to 2048 kHz. Also included are microphone and BTL-mode speaker amplifiers that can direct drive 32 ohm dynamic earpieces without an external amplifier.

Company: ROHM CORP.

Product URL: Click here for more information

Sponsored Recommendations

Near- and Far-Field Measurements

April 16, 2024
In this comprehensive application note, we delve into the methods of measuring the transmission (or reception) pattern, a key determinant of antenna gain, using a vector network...

DigiKey Factory Tomorrow Season 3: Sustainable Manufacturing

April 16, 2024
Industry 4.0 is helping manufacturers develop and integrate technologies such as AI, edge computing and connectivity for the factories of tomorrow. Learn more at DigiKey today...

Connectivity – The Backbone of Sustainable Automation

April 16, 2024
Advanced interfaces for signals, data, and electrical power are essential. They help save resources and costs when networking production equipment.

Empowered by Cutting-Edge Automation Technology: The Sustainable Journey

April 16, 2024
Advanced automation is key to efficient production and is a powerful tool for optimizing infrastructure and processes in terms of sustainability.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!