Heat Exchanger Dissipates 330W

Jan. 1, 2003
A new heat exchanger is capable of dissipating 330W for every degree Celsius difference between water and air entering the device. Measuring about 24" x 24"x 2.6", the Model 727 heat exchanger allows four fans to be mounted on an aluminum fan shroud.

A new heat exchanger is capable of dissipating 330W for every degree Celsius difference between water and air entering the device. Measuring about 24" x 24"x 2.6", the Model 727 heat exchanger allows four fans to be mounted on an aluminum fan shroud. Typical applications include closed-loop liquid cooling required in semiconductor manufacturing and test equipment, as well as the cooling of lasers, electronic cabinets, and other demanding applications. Tubing and all manifold circuitry are made of copper and mechanically bonded to a riffled and corrugated fin. The fin is said to provide as much as 5% more heat transfer than other flat fin designs. All joints are silver brazed to ensure maximum strength and reliability. For internal cleanliness, the 727 heat exchanger receives a 10-minute hot water flush and a 10-minute final flush using a corrosion inhibitor. THERMATRON ENGINEERING INC., Methuen, MA. (978) 687-8844.

Company: THERMATRON ENGINEERING INC.

Product URL: Click here for more information

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!