OCXOs Are Stable Enough For GPS Yet Cost-Sensitive For SDH/SONET

June 1, 2000
Packaged in a metal case measuring just 40 mm x 30 mm x 20mm, the CFPO-4 series oven-controlled crystal oscillators (OCXOs) are claimed to be stable within ±0.002 ppm across an operating temperature range from -20°C to 75°C, making them

Packaged in a metal case measuring just 40 mm x 30 mm x 20mm, the CFPO-4 series oven-controlled crystal oscillators (OCXOs) are claimed to be stable within ±0.002 ppm across an operating temperature range from -20°C to 75°C, making them suitable for global-positioning system (GPS) time-reference modules, CDMA basestations, and GSM networks. Built around SC-cut quartz crystals, the devices are available with output frequencies from 2 to 20 MHz, or up to 40 MHz for less demanding stability specifications. Standard frequencies include 4.096, 5.0, 8.192, 10.0, 13.0, 16.384 and 26.0 MHz.
Because of their smaller package, these devices are said to be significantly less costly than most oscillators in their class. Lower-stability oscillators in the series are considered to be both suitable and cost effective for SDH/SONET fixed-line switching systems, in which they manage to surpass the Stratum 3E specification by a factor of two.
The CFPO-4 devices can also be supplied with a custom footprint to meet specific requirements. Available options include operating voltages of 9, 12 and 15V and sine-wave or HCMOS outputs. Steady-state power consumption at 12V is less than 1.8W in calm air at 25°C. Pricing starts at $110 depending on specification and quantity.

Company: C-MAC QUARTZ CRYSTALS - Frequency Products

Product URL: Click here for more information

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!