Electronicdesign Com Products Test And Measurement Emi Measuring Receiver Meets International Specs27

EMI Measuring Receiver Meets International Specs

Nov. 1, 2002
An EMI measuring receiver fully compliant with CISPR 16 part 1 (International Special Committee on Radio Interference), the SMR4518 spans the range of 9 kHz to 18 GHz. Targeted for use by EMC testing laboratories and military and automotive standards

An EMI measuring receiver fully compliant with CISPR 16 part 1 (International Special Committee on Radio Interference), the SMR4518 spans the range of 9 kHz to 18 GHz. Targeted for use by EMC testing laboratories and military and automotive standards and commercial EMC testing operations, the instrument's measurement accuracy is less than 1.5 dB over 9 kHz to 1005 MHz, under 2.0 dB over 1005 MHz to 2.0 GHz, and less than 2.5 dB from 2.75 to 18 GHz. Pre-selection and auto-ranging provide over-ranging protection on pulse measurements across the receiver's full frequency range. Sensitivity is increased by a preamplifier behind the pre-selection stage and, together with the low noise figure, enables accurate signal measurements from -26 to 137 µV. Storable functions include device presetting, measured data, frequency spectrum and tables, and others. Resolution is 100 Hz and frequency accuracy is 10-6. An 8.5" TFT color LCD display shows detectors, graphs and data simultaneously. Prices start at $61,780. SCHAFFNER EMC INC., Edison, NJ. (732) 225-9533 ext 225.

Company: SCHAFFNER EMC INC.

Product URL: Click here for more information

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!