Electronicdesign 17576 Zglue Promo 0
Electronicdesign 17576 Zglue Promo 0
Electronicdesign 17576 Zglue Promo 0
Electronicdesign 17576 Zglue Promo 0
Electronicdesign 17576 Zglue Promo 0

zGlue Fabric Reduces Size of Wearable Tech

Aug. 21, 2017
This silicon interposer fabric lets developers integrate multiple die into a single, compact chip. It is ideal for compact form factors needed for applications like wearable devices.

Silicon interposer technology allows multiple die to be combined onto a single chip. This is different from stack or multi-die chips that use wires to connect to a substrate. Essentially, the interposer is similar to a printed circuit board (PCB), but on a much smaller scale.

Silicon interposers used to be exotic technology, but they have become more common as fabrication practices have improved. It was used in high-end FPGA solutions like Xilinx’s Virtex-7 2000T where it delivered 10,000 connections between multiple die in a 2.5D architecture. Altera used a slightly different approach to link its high-speed serial interfaces to the FPGA fabric.

Silicon interposer system design tends to be less complex that an SoC design, but it is still a challenge. Up until now it hasn’t put the technology into the same realm as PCB design, but a company called zGlue is looking to change this—at least on a small scale.

zGlue has developed a programmable silicon interposer fabric that targets compact applications (e.g., wearable tech) that includes applications such as medical devices. It allows developers to combine die onto the fabric, resulting in a much smaller compact form factor. The programmability of the underlying structure speeds the implementation process allowing chips to be delivered in as little as eight weeks while reducing the form factor by a factor of 10.

The zGlue interposer comes in one size at this point, but it can be used for any number of die that will fit on it. Developers can provide their own and work with zGlue to incorporate them into a chip, or they can take advantage of BGA “chiplets” that are die already approved by zGlue (Fig. 2). These include a range of sensors, microcontrollers, memory, and even RF technology like Bluetooth or cellular chiplets. They hybrid memory is used for configuration data, system test support, as well as secure key storage. Memory can also be supplied as a chiplet or as part of other devices like the microcontroller chiplets.

The ZiP platform can employ a number of analog and digital ports—up to 20 of each. The system also comes with zGlue’s system and power management support. The power management support allows operation with a range of batteries, including lithium and NiCads, as well as low-voltage supplies. Systems have built-in voltage regulators. Eventually gGlue will have a zGlue ZiPlet Store where developers can pick and choose chiplets.

The current configurations provide a working area up to 48 mm2 and 20 I/O pins. Standard external interfaces include I2C, SPI, UART, and GPIO. Analog/RF connections up to 2.4 GHz are supported. The interconnect fabric supports up to 3 K connections.

At this point zGlue handles most of the system configuration versus using an FPGA- or PCB-style layout tool. Developers typically come to zGlue with a block diagram or an existing PCB layout that will be converted into a single chip.

It is possible to perform similar tricks found in PCB designs—such as laying out larger spaces for a chiplet—so that larger, typically higher-capacity or -performance chiplets can be utilized in additional products. This is a common methodology when companies need to deliver a range of products with increasing levels of functionality, capacity, or performance.

zGlue’s platform is not a fit for all compact embedded applications, but it can be a significant advantage for those where small, custom configurations are needed. It is significantly less costly than creating a custom SoC while providing similar flexibility when the appropriate chiplets are available.

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!