1U Supplies Deliver Up To 600W

March 1, 2003
Measuring just 5" x 11.5" x 1.6" in height, the HP6 series hot-swap power supplies deliver up to 600W of multiple-output regulated power. With up to five outputs, including a 5 Vdc, 1A standby output, the supplies have a power density of 6.52W/cubic

Measuring just 5" x 11.5" x 1.6" in height, the HP6 series hot-swap power supplies deliver up to 600W of multiple-output regulated power. With up to five outputs, including a 5 Vdc, 1A standby output, the supplies have a power density of 6.52W/cubic inch. Active current sharing is available on all four outputs, and multiple supplies can be wired together for redundant N+1 applications or for higher system power levels. Six standard models are available and custom units can be assembled to meet specific output requirements. Other features include an I2C interface with interrupt capability, power factor correction, no minimum load requirement, self-contained ORing diodes on all outputs, current limiting, over-voltage protection, and full output power up to 50ºC. Pricing ranges from $368 to $442 in OEM quantities. Samples are available in two weeks. MAGNETEK POWER ELECTRONICS GROUP, Chatsworth, CA. (818) 727-2216.

Company: MAGNETEK POWER ELECTRONICS GROUP

Product URL: Click here for more information

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!