Electronicdesign Com Products Analog And Mixed Signal Mid Band Op Amps Take Up Little Space27817

Mid-Band Op Amps Take Up Little Space

March 1, 2003
Available in a tiny SOT-23-6 package the S-8941xA series CMOS, single mid-band op amps are said to be capable of being driven at lower voltages with lower current consumption than existing bipolar op-amps. Designed primarily for battery-powered

Available in a tiny SOT-23-6 package the S-8941xA series CMOS, single mid-band op amps are said to be capable of being driven at lower voltages with lower current consumption than existing bipolar op-amps. Designed primarily for battery-powered products, the devices feature a quiescent current of 135 µA at 1.2V with a gain-bandwidth product of 550 kHz and a slew rate of 1 V/µs. Input and output voltages range from 1.2V to 5.5V and input offset voltage ranges down to 5 mV maximum for the S-89411A and 10 mV maximum for the S-89410A. Nominal current consumption for both devices is 0.1 µA in shutdown mode. Price is $0.35 each/10,000. For further information, contact SEIKO INSTRUMENTS USA INC., Torrance, CA. (800) 934-9334.

Company: SEIKO INSTRUMENTS USA INC.

Product URL: Click here for more information

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!