Electronicdesign 30059 Pet Np Piezo Driver Promo
Electronicdesign 30059 Pet Np Piezo Driver Promo
Electronicdesign 30059 Pet Np Piezo Driver Promo
Electronicdesign 30059 Pet Np Piezo Driver Promo
Electronicdesign 30059 Pet Np Piezo Driver Promo

Piezo-Sounder Driver Addresses Needs of this Versatile Transducer

Dec. 11, 2019
The PAM8904E driver, designed for piezo-based sounders (buzzers), has a multilevel boost converter and can drive the capacitive loads associated with these audio transducers.

Sounders (buzzers) based on piezoelectric principles are widely used in countless applications due to their small size, low power demands, versatility, and low cost. However, they have two attributes that make their use in low-voltage, battery-powered systems a challenge: They need a relatively high drive voltage (typically, tens of volts), which is unavailable, and they present a capacitive load that may be difficult to drive.

The PAM8904E (see figure) from Diodes Inc. addresses the needs of this versatile transducer. It supports both single-ended and differential output modes with minimal external components. The device operates from a wide voltage-supply range of 1.5 to 5.5 V and accepts an input signal between 20 Hz to 300 kHz.

The PAM8904E driver from Diodes Incorporated is designed for piezo-based sounders. It includes a multilevel boost converter and can drive the capacitive loads associated with these audio transducers.

The integral charge-pump boost converter operates in 1×, 2×, and 3× modes, allowing the PAM8904E to generate output voltages up to 18 V p-p from a 3-V supply or 27 V p-p from a 4.5-V supply. On the output side, this IC is able to drive loads as high as 47 nF. The vendor claims that competing devices can typically only drive a load up to 15 nF and they require a higher supply voltage. The unique drive technology combines low inrush current, low EMI, and high efficiency, which are all desirable characteristics.

The PAM8904 comes in a W-QFN2020-12 Type A package measuring just 2.00 × 2.00 × 0.80 mm; other package options are available. Additional features include thermal shutdown, overcurrent protection, and short-circuit protection. The automatic shutdown reduces current consumption to 1 µA. When combined with the wake function, the device is a good fit for power-constrained products. Prices begin at $0.30 in 1000-piece quantities; more information is available in the datasheet.

Sponsored Recommendations

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

How to Quickly Leverage Bluetooth AoA and AoD for Indoor Logistics Tracking

March 27, 2024
Real-time asset tracking is an important aspect of Industry 4.0. Various technologies are available for deploying Real-Time Location.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!