Electronicdesign 24694 Link Ncstcharger Promo
Electronicdesign 24694 Link Ncstcharger Promo
Electronicdesign 24694 Link Ncstcharger Promo
Electronicdesign 24694 Link Ncstcharger Promo
Electronicdesign 24694 Link Ncstcharger Promo

SiC Power Devices Lead to More Efficient, Smaller EV Battery Charger

Nov. 16, 2018
A SiC 1200-V MOSFET and diode modules enable the design of a prototype EV battery charger with better characteristics than current state-of-the-art chargers.

Researchers at North Carolina State University have developed a medium-voltage fast charger (MVFC) prototype for electric vehicles that:

  • Is at least 10X smaller than existing systems, while charging at the same speed.
  • Wastes 60% less power during the charging process.
  • Employs silicon-carbide (SiC) power semiconductors.

The table compares the characteristics of today’s state-of-the art EV battery charger with the proposed MVFC. And Figure 1 compares the size of the state-of-the-art and MVFC chargers.

1. Comparison of the state-of-the art system, which employs a service transformer and EV charger, and the proposed MVFC.

Conventional, 50-kW state-of-the-art chargers include a distribution transformer, which weighs 1000 kg, and a separate fast charger unit, which weighs 200 to 600 kg. To support the weight, this transformer-and-charger system usually needs to be installed on a concrete slab.

In contrast, the MVFC doesn’t employ a distribution transformer, but takes power directly from a utility medium-voltage line and converts it to dc, to be compatible with the electric vehicle’s battery.

“Our 50-kW MVFC weighs only around 100 kg and can be wall- or pole-mounted,” says Srdjan Lukic, an associate professor of electrical engineering at NC State and one of the researchers who developed the technology. “The MVFC does the work of both the transformer and the fast charger, taking power directly from a medium-voltage utility line and converting it for use in an electric-vehicle battery.

“This new approach offers 4X more power from the same system footprint, reducing the system installation costs at the same time,” says Srdjan Srdic, a research professor at NC State who also worked on developing the technology. Figure 2 shows a developed MVFC system with basic technical specifications.

2. MVFC power stage whose volume is 63L (119L packaged).

At present, the best transformer-and-charger stations are reported as having an efficiency of up to 93%, meaning that at least 7% of the power is lost to heat during the charging process.

In testing, the prototype MVFC has an efficiency of at least 97.5%, meaning an additional 4.5% of the power is used to charge the vehicle, rather than being wasted as heat. This reduces operating costs, increasing revenue without increasing the cost to consumers. “In other words, we were able to cut the wasted energy by more than 60%,” says Srdic.

The researchers were able to make the technology so much smaller, in part, because they used wide-bandgap semiconductor devices. This also made the technology more energy-efficient.

3. The MVFC power-stage circuit employs SiC power MOSFETs and diodes.

Figure 3 shows a simplified MVFC circuit that uses SiC power devices. The SiC devices are from Microsemi Corp., a subsidiary of Microchip Technology Inc. They include:

  • APTMC120AM55CT1AG power module: Two SiC power MOSFETs (VDSS = 1200 V; RDS(ON) = 49 mΩ max @ TJ = 25°C; ID = 55 A and PD = 250 W @ TC = 25°C) and two SiC Schottky diodes (zero reverse recovery and zero forward recovery)
  • APT2X60DC120J dual anti-parallel SiC diode power module: VRRM = 1200 V; IF = 60 A @ TC = 100°C; zero reverse recovery; zero forward recovery; ISOTOP package (SOT-227)
  • APT40DC120HJ SiC diode bridge power module: VRRM = 1200 V; IF = 40A @ TC = 100°C; zero reverse recovery; zero forward recovery; ISOTOP package (SOT-227)
  • Semikron SKNa 102/45: High-voltage stud silicon power diodes configured as a full-wave bridge

The current version of the MVFC charges at the same speed as existing charging stations because the MVFC was designed to operate at 50 kW, which is the power level of a typical fast charger (Fig. 4). The system can be scaled up to provide substantially higher power and connect to the three-phase MV line.

4. Experimental test results at rated input and output voltage and rated power.

Next Generation

The research team is in the process of building a next-generation MVFC that handles much higher power, capable of charging more vehicles and charging them more quickly.

“We’ve had the more powerful, multi-vehicle MVFC in mind for some time, and recently received funding from the Department of Energy to build a next-generation prototype,” says Lukic, who is the deputy director of the FREEDM Engineering Research Center at NC State.

In the multi-port station design, a utility line is connected directly to a solid-state transformer, (SST), which is a power-electronics-based smart transformer. The SST then feeds a local dc microgrid, with battery storage systems and multiple charging nodes that vehicles can plug into.

“We are building five charging nodes into the prototype, but there could be twice as many or more,” says Lukic.

The multi-port MVFC will have a rating capacity of 1 MW, with each charging node capable of providing up to 350 kW of power. The upgrade from 50 kW to 350 kW means that a vehicle can be charged up to 7X faster.

“We’re currently looking for industry partners to help us move from our fully functional prototypes to the marketplace,” says Lukic.

The development of the existing MVFC prototype was done with support from the PowerAmerica Institute, a public-private research initiative housed at NC State and funded by the DoE’s Office of Energy Efficiency and Renewable Energy (EERE). The development of the multi-vehicle MVFC prototype is being funded by EERE. FREEDM was created with support from the National Science Foundation.

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!