Electronicdesign 26096 Promo G1 Fuel Cell 0
Electronicdesign 26096 Promo G1 Fuel Cell 0
Electronicdesign 26096 Promo G1 Fuel Cell 0
Electronicdesign 26096 Promo G1 Fuel Cell 0
Electronicdesign 26096 Promo G1 Fuel Cell 0

Thinner Catalysts Lower Costs of Automotive Fuel Cells

March 18, 2019
Ultrathin catalysts would use less precious metal.

Researchers at Johns Hopkins University have developed a new method of increasing the reactivity of ultrathin nanosheets, just a few atoms thick, that could make fuel cells for hydrogen cars less expensive. The same technology could also lower the price of of bulk chemicals and materials.

“Every material experiences surface strain due to the breakdown of the material’s crystal symmetry at the atomic level,” says Chao Wang, an assistant professor of chemical and biomolecular engineering at Johns Hopkins University. “We discovered a way to make these crystals ultrathin, thereby decreasing the distance between atoms and increasing the material's reactivity.”

Strain is, in short, the deformation of any material. For example, when a piece of paper is bent, the intricate lattices that hold the paper together are changed in response to the applied force.

In this project, researchers manipulated the strain effect, or distance between atoms, making the material change dramatically. By getting those lattices thin—roughly one-millionth the thickness of a human hair—the material becomes easier to manipulate, just as a single sheet of paper is easier to bend than a thicker stack of paper.

“We’re essentially using force to tune the properties of thin metal sheets that make up electrocatalysts, which are part of fuel-cell electrodes,” says Jeffrey Greeley, professor of chemical engineering at Purdue. “The ultimate goal is to test this method on a variety of metals.”

“Tuning the materials’ thinness lets us create more strain, which changes the material’s properties, including how molecules are held together,” adds Wang. “This means we have more freedom to accelerate reactions we want on the material’s surface.”

Improving reactions can increase catalysts’ activity for fuel-cell cars. Although fuel cells represent a promising technology for emission-free electrical vehicles, the challenge lies in reducing the costs associated with the precious-metal catalysts such as platinum and palladium. This limits fuel cell viability for most consumers. A more active catalyst for fuel cells would reduce cost and clear the way for widespread adoption of green, renewable energy.

Wang and colleagues estimate that their new method can increase catalyst activity by 10 to 20 times, using 90% less precious metals than what is currently needed in a fuel cell.

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!