Component Specifier: Transformers And Inductors

April 12, 2004
TRANSFORMERS TYPE/Model ...
TRANSFORMERS
TYPE/Model Features P & A Source
CURRENT SENSE
ACST-260

Low-profile current-sense transformer designed to monitor current in low-frequency applications monitors current up to 30 A at frequencies up to 200 Hz turns ratio is 1:500 primary to sense class B insulation system dielectric strength of 3 kV Starts at $1.29 each in 1000-unit lots eight to 10 weeks Zettler Magnetics Inc.
www.zettlermagnetics.com
(949) 360-5838
CURRENT SENSE
CST5028 series

Surface-mount current-sense transformers for dc-dc converter applications low profile (0.280 in.) footprint is 0.495 in. by 0.575 in. pick and place header turns ratios of 1:1:50, 100, 200 15-A current rating 50- to 500-kHz frequency range Starts at $0.81 each in 1000-unit lots stock to six weeks Inductor Supply Inc.
www.inductorsupply.com
(800) 854-1881
TOROIDAL
Custard

Custard (CUSTom/standARD) line of customizable general-purpose toroidal transformers based on the company's standard cores with primary windings and insulation in place power ratings range from 20 VA to 1000 VA standard primary windings for 117 V/230 V, 50- to 60-Hz operation secondary windings as specified by customer certified to UL, CSA, EN, and IEC standards class B insulation system Example is $52.50 each in 100-unit quantities for 500-VA transformer with two secondary windings within 72 hours Bridgeport Magnetics
www.bridgeportmagnetics.com
(800) 836-5920
BALUN
FB650/FB850

Subminiature surface-mount femto balanced to unbalanced (balun) transformers designed for differential input and output locations on next-generation wireless chip sets 0.055-dB insertion loss (max) 2.4- to 2.5-GHz frequency (FB650) 4.8- to 5.9-GHz frequency (FB850) Ranges from $0.10 to $0.20 each depending on volume stock Anaren Inc.
www.anaren.com
(315) 432-8909
INDUCTORS
TYPE/Model Features P & A Source
SMT CHIP
GLTZ series

Series of extremely small surface-mount chip inductors inductance range of 1.0 nH to 27 nH in 17 models standard tolerance on inductance is ± 5% epoxy encapsulated 0.5 mm by 0.25 mm by 0.25 mm (0201 size) high Q at microwave frequencies $0.092 each in
15,000-unit lots; 10 weeks
Sprague-Goodman Electronics
www.spraguegoodman.com
(516) 334-8700
MINIATURE SHIELDED
HM66 series

Low-profile high-current shielded surface-mount inductors board-mounted profiles range from 1.8 to 4.0 mm rated for up to 10 A continuous current inductance values from 1 to 330 µH; dc resistance of 0.0081 O to 1.540 O ; - 25 ° C to 125 ° C operating temperature range Typically $0.25 each in quantities of 25,000 stock to 10 weeks BI Technologies Corp.
www.bitechnologies.com
(714) 447-2345
POWER CHOKE
B82731T

Series of current-compensated power chokes double choke with ferrite EE core 250-V ac rated voltage 0.3- to 1.8-A rated current 3.3- to 100-mH rated inductance two-section winding used in switch-mode power supplies and electronic lamp ballasts $0.60 each in 10,000-unit lots six weeks Epcos Inc.
www.epcos.com
(800) 888-7728
POWER
PG0137 series

Low-profile, surface-mount inductors for dc-dc converters 0.090- to 1.35-µH inductance value 3.2-mm maximum height footprint is 6.8 mm by 6.8 mm (industry standard 2525 footprint) current rating up to 18 A temperature range to 130 ° C Starts at $0.29 each in 100,000-unit lots four to six weeks Pulse Engineering Inc.
www.pulseeng.com
(858) 674-8100
HIGH CURRENT
HC8

Family of high-current, surface-mount inductors 4.0-mm height 0.141- to 1.27-µ H inductance range 16- to 39-A current range frequency range up to 500 kHz designed for use in VRM circuits with high-speed switch-mode applications Mid $0.70s stock to eight weeks Cooper Electronic Technologies
www.cooperet.com
(561) 752-5000

Sponsored Recommendations

Near- and Far-Field Measurements

April 16, 2024
In this comprehensive application note, we delve into the methods of measuring the transmission (or reception) pattern, a key determinant of antenna gain, using a vector network...

DigiKey Factory Tomorrow Season 3: Sustainable Manufacturing

April 16, 2024
Industry 4.0 is helping manufacturers develop and integrate technologies such as AI, edge computing and connectivity for the factories of tomorrow. Learn more at DigiKey today...

Connectivity – The Backbone of Sustainable Automation

April 16, 2024
Advanced interfaces for signals, data, and electrical power are essential. They help save resources and costs when networking production equipment.

Empowered by Cutting-Edge Automation Technology: The Sustainable Journey

April 16, 2024
Advanced automation is key to efficient production and is a powerful tool for optimizing infrastructure and processes in terms of sustainability.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!