AS1110 LED Driver

March 5, 2007
QUICK TAKE:The AS1110 LED driver is a 16-channel, constant-current driver that integrates error diagnostic modes for detecting open and shorted LEDs (see

QUICK TAKE:
The AS1110 LED driver is a 16-channel, constant-current driver that integrates error diagnostic modes for detecting open and shorted LEDs (see figure). AUSTRIAMICROSYSTEMS USA INC., Raleigh, NC. (919) 676-5292.

MORE INFO:
The device employs the serial data input/output lines for error information read back, eliminating the need for PCB tracks for diagnostics. Its 16 regulated ports provide constant current within a wide range of forward voltage variations, and the output ports can endure a maximum voltage of 15V. Via an external resistor, current levels are adjustable from 0.5 mA to 100 mA. Accuracy is ±3% between channels. The driver can be used in multiplexed mode to drive up to 64 independent LED nodes while maintaining full functionality of the error detection modes. Other features include an operating temperature range from -40˚C to +85°C and a 30MHz serial interface that ensures high refreshing rates even for huge LED display modules. The AS1110 is available in a 24-pin SSOP-150 and a 28-pin QFN package.

MORE ABOUT AS1110 LED ERROR DETECTION
Claimed as easy and intuitive to use, the LED error detection of the AS1110 can be invoked during normal operation without switching into a separate detection mode. This makes the software interface even more user-friendly while detection can be done extremely fast. The device can detect any open- or short-circuit as well as an over-temperature occurrence. For immediate detection of those errors, a global error flag is available at serial data output, detecting any of those errors quickly and precisely. Furthermore, a detailed error report can be produced with the exact position of the broken LED.

In order to avoid the typical flickering of LED displays during error detection, the company has introduced the Low-Current Diagnostic mode. In this mode, a small test current of only 0.6 mA is applied to the display for a very short time. As a result, LED testing is not visible and can therefore be applied during normal operation.

PRICE AND AVAILABILITY
The AS1110 is priced at $ 1.59 each/1,000. Samples are currently available and volume production is scheduled for March 2007.

ON THE WEB
More product specific information can be downloaded from the austriamicrosystems website at www.austriamicrosystems.com/03products/products_detail/AS1110/AS1110.htm

EEPN At Your Service www.eepn.com/service

Company: AUSTRIAMICROSYSTEMS

Product URL: Click here for more information

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!