Electronicdesign 7453 112661promo
Electronicdesign 7453 112661promo
Electronicdesign 7453 112661promo
Electronicdesign 7453 112661promo
Electronicdesign 7453 112661promo

Low Power DSPs Target Audio, Imaging And Automation Applications

June 13, 2014
Analog Devices new ADSP-BF70x incorporates the new Blackfin+ core. It uses only 95 mW of power at 400 MHz.

Analog Devices has added the ADSP-BF70x to the Blackfin processor family (Fig. 1). The new offerings incorporate the new Blackfin+ core. It can handle 2 by 16-bit, 32-bit and complex math operations in a single cycle. It is backwards compatible and delivers 800 MMACS for 16-bit operations and half that for 32-bit operations. Versions are available with up to 1 Mbyte of SRAM with ECC support that can also be uses as an L2 cache. The L1 cache is 132 Kbytes. The 16-bit DDR2 and LPDDR support is optional. The system can run using only on-chip SRAM if off-chip memory is not required.

Figure 1. Analog Devices ADSP-BF70x uses the new Blackfin+ core providing access to 1 Mbyte of SRAM with ECC support.

The chips target a wide range of applications from mobile and automotive audio processing to imaging applications. They also address many industrial automation application areas.

The new chips can use as little as 95 mW of power when running at 400 MHz. Interfaces include ePPI, I2C, 4-bit SD/SDIO/MMC, two SPORTs, two UARTs, and two CAN 2.0B. The three SPI interfaces handle dual and quad SPI. There is also a host USB 2.0 OTG port. Also part of the mix is the security accelerator. This also includes one-time programming (OTP) support.

Analog Devices have a number of different evaluation and development platforms like the ADZS-BF707-EZLITE (Fig. 2). It includes the $150 ICE-1000 JTAG controller. The systems also work with the higher performance ICE-2000.

Figure 2. The ADZS-BF707-EZLITE uses a BF707 with DRAM support.

The chips are supported by Analog Devices’ Eclipse-based CrossCore Embedded Studio 1.1.0. It has seamless integration with RTOS, middleware and protocols stacks such as Micrium µC/OS-III. Analog Devices also provides a wide range of royalty free software such as its Image Processing Toolbox and audio decoders. The Blackfin family enjoys a wide range of compatible third party products including The Mathworks MATLAB and Simulink.

Pricing for the ADSP-BF70x starts at $3.99. The chips without the DRAM controller come in a 12 mm by 12 mm, 88 lead QFN package. The versions with the controller are the same size but in a 184-ball BGA. These chips also have an 8-bit eMMC interface as well as a 4-channel, 12-bit ADC.

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!