Electronicdesign 7387 0523npbwti
Electronicdesign 7387 0523npbwti
Electronicdesign 7387 0523npbwti
Electronicdesign 7387 0523npbwti
Electronicdesign 7387 0523npbwti

Ultra-Low-Power DSP Delivers 200 MHz To Audio/Video Analytics

May 27, 2014
Featuring up to 200-MHz performance, Texas Instruments’ TMS320C5517 digital signal processor (DSP) speeds processing of data with low standby and low active power consumption, thanks to increased parallelism.

Featuring up to 200-MHz performance, Texas Instruments’ TMS320C5517 digital signal processor (DSP) speeds processing of data with low standby and low active power consumption, thanks to increased parallelism. Its core includes 13.33- to 5-ns instruction cycle time, a 75- to 200-MHz clock rate, dual multiply-and-accumulate units (up to 450 million multiply-accumulates per second, MMACS), two ALUs, and three internal data/operand read buses plus two write buses. It features 320 kbytes of zero-wait-state RAM, 64 kbytes of dual-access RAM (DARAM), 256 kbytes of single-access RAM (SARAM), and 128 kbytes of zero-wait-state ROM.  Among the peripherals are a universal host-port interface (UHPI) with 16-bit multiplexed address or data bus, master and slave multichannel serial ports interface (McSPI) with three Chip Selects, a master and slave multichannel buffered serial ports interface (McBSP), and 16- and 8-bit external memory interface (EMIF) with glueless interface to NAND and NOR flash, SRAM, and SDRAM/mSDRAM. Also included are eMMC, MMC, and SD interfaces; an SPI with four Chip Selects; an I2C bus; three I2S bus modules; and up to 26 GPIO pins. Applications include audio/video processing, biometrics, and other analytic-specific apps.

TEXAS INSTRUMENTS INC.

Sponsored Recommendations

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

How to Quickly Leverage Bluetooth AoA and AoD for Indoor Logistics Tracking

March 27, 2024
Real-time asset tracking is an important aspect of Industry 4.0. Various technologies are available for deploying Real-Time Location.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!