Electronicdesign 28863 Silabs Modules Promo Copy
Electronicdesign 28863 Silabs Modules Promo Copy
Electronicdesign 28863 Silabs Modules Promo Copy
Electronicdesign 28863 Silabs Modules Promo Copy
Electronicdesign 28863 Silabs Modules Promo Copy

Wireless Modules Simplify IoT Device Design

Sept. 25, 2019
The Gecko Series 2 modules developed by Silicon Labs help streamline wireless deployment of Internet of Things devices.

Silicon Labs’ Gecko Series 2 wireless modules target connected IoT devices. The xGM210P is designed for line-powered solutions while the xGM210L is optimized for connected LED light bulbs (Fig. 1). They utilize the same SoC, but the xGM210L is designed to allow for orientation of the built-in antenna to provide optimum operating conditions within a light bulb. The modules can handle temperatures up to 125°C.

1. The xGM210P (left) is designed for line-powered solutions while the xGM210L (right) is optimized for connected LED light bulbs.

The modules leverage the EFR32xG21 SoC with a Cortex-M33 processor that has DSP and FPU support (Fig. 2). The processor supports Arm TrustZone and Silicon Labs included its own dedicated security core. The hardware crypto acceleration supports AES (128/192/256), SHA 1, SHA 2 (SHA 224/SHA256), ECC (256 bit), and ECDSA (256) and ECDH (p192, p256), HMAC, and J-PAKE. It has a true random number generator (TRNG) with a high entropy source that’s compliant with NIST SP 800 90A/B/C and AIS 31.

2. The modules are based on an EFR32xG21 SoC with a Cortex-M33 processor. The secure element provides secure storage and secure boot support.

The system supports secure boot with a root of trust and secure loader. There’s also support for secure debug. A secret key can be used to lock and unlock the debug support. This can prevent debugging in the field, but it can be enabled for diagnostic purposes.

The SoCs incorporate up to 1024 kB of flash storage and 96 kB of RAM. Peripherals include three USART, a pair of I2C ports, two 16-bit timers and one 32-bit timer, plus a pair of watchdog timers and a RTCC. On the analog side, there are a pair of comparators and a 12-bit, 1-Msample/s SAR ADC. 

The xGM210P transmitter delivers up to +20 dBm with −104 dBm sensitivity at 250-kb/s O-QPSK, −105 dBm sensitivity at 125-kb/s GFSK, and −97 dBm sensitivity at 1-Mb/s GFSK. And the xGM210L module provides up to +12.5 dBm with −104 dBm sensitivity at 250-kb/s O-QPSK, −104 dBm sensitivity at 125-kb/s GFSK, and −97.5 dBm sensitivity at 1-Mb/s GFSK. The wireless support can handle Bluetooth 5.1 and Bluetooth mesh. It also will support Zigbee 3.0 and Thread. Bluetooth mesh uses a simplified, flood routing methodology. Zigbee and Thread use a more complex mesh routing system that is more efficient and uses less power. It’s possible to switch between protocol, or support both. Multiprotocol support allows a device to operate using Zigbee but configured via Bluetooth.

3. Silicon Labs’ standard development kit carrier board can accept both the xGM210P and xGM210L modules.

Developers can take advantage of Silicon Labs’ development platform that accepts either module (Fig. 3). The modules are supported by Silicon Labs’ Simplicity Studio IDE. This includes network analyzer and energy profiling tools.

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!