FTDI Chip is now offering the MM900EVxA series of FT90X-centered modules to facilitate the evaluation, development and subsequent implementation of its 32-bit FT90X Super-Bridge MCUs. Optimized for use in home security, industrial control, home/building automation systems, data logging and embedded multimedia applications, the series is made up of 4 different units. The MM900EV2A and MM900EV3A incorporate 1.3 M pixel camera modules that are capable of capturing images from VGA (up to 30 fps) to SXGA (up to 15 fps) resolution in front-facing and rear-facing configurations respectively. The MM900EV1A offers the same functionality as the EV2A and EV3A, excluding the camera unit, and is aimed primarily at bridging functions. The MM900EV-LITE is optimized for HMI and embedded display applications.
Each module in the MM900EVxA series has a built-in audio codec with microphone input pins, a 3.5 mm stereo headphone jack, a stereo speaker output header, dc power socket, 2 RGB LEDs, reset switch and a real time clock with coin cell battery support. The modules also include an RJ45 connector and Micro SD card socket, USB-A and Micro-B USB ports, 40-way expansion connector, Micro-MaTch 2x5 female socket, 2 x 8-pin 2.54 mm pitch connector and 16-pin 0.5 mm pitch FFC/FPC connector.