Relay Repeater Makes Adding Safety Alarms Not So Alarming

Sept. 7, 2012
Featuring three contacts per alarm input, the SRM Safety Relay Module from Moore Industries enables alarm contacts to be integrated into safety processes without having to rely on a specialized form of installation
SW_Moore_0907-AFeaturing three contacts per alarm input, the SRM Safety Relay Module enables alarm contacts to be integrated into safety processes without having to rely on a specialized form of installation. Moore Industries’ relay repeater has been certified by “exida” for single use in safety instrumented systems up to SIL 2. It accepts single contact closure inputs from logic solver trip outputs. The SRM is a force-guided relay; therefore, it eliminates the possibility of having contacts become stuck in both normally open (NO) and normally closed (NC) positions at the same time. The device’s forcibly guided contacts are monitored and mechanically linked to the same armature as the output contacts. It comes housed in a “universal” aluminum DIN case that can be mounted on either a 32-mm G-type or 35-mm top-hat DIN rail. Front-panel visual diagnostics include three LED indicator lights that reflect the current input, output, and power status.

MOORE INDUSTRIES

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!