The device features an initial gain of 20V/V, with a 2.2MHz bandwidth with a maximum ±0.13% gain error over the temperature range. The AD8410A has a minimum DC common-mode rejection ratio of 123dB from −2V to +70V. It performs bidirectional current measurements across a shunt resistor in industrial applications.

The MAX22163 is part of a family of 6-channel, reinforced, fast, low-power digital galvanic isolators using Analog Devices’ proprietary process technology. It features reinforced isolation with a withstand voltage rating of 3kV_RMS for 60 seconds. This device is rated for operation at ambient temperature from -40°C to +125°C.

The LTC7890 is a high performance, dual step-down, DC-to-DC switching regulator controller that drives all N-channel synchronous gallium nitride field effect transistor power stages from input voltages up to 100 V. It requires no protection diodes and no additional external components compared to a silicon metal-oxide semiconductor field effect transistor.

The MAX22664 is part of a family of 6-channel, reinforced, fast, low-power digital galvanic isolators using Analog Devices’ proprietary process technology. It features reinforced isolation with a withstand voltage rating of 5kV_RMS for 60 seconds. This device is rated for operation at ambient temperatures from -40°C to +125°C.

The LT8374 is a high efficiency, monolithic, synchronous step-down DC-to-DC converter with fixed-frequency and peak current control. The LED current is programmed by a resistor from CTRL pin to ground or by applying a PWM signal to the CTRL pin. This device is ideal for matrix applications.

The LTM4702 is a complete 8A step-down Silent Switcher® μModule® regulator in a tiny package. Included in the package are the switching controller, the power MOSFETs, an inductor, and support components. Operating over an input voltage range of 3V to 16V, it supports an output range of 0.3V to 5.7V.

The MAX17554 is an ultra-small, high-efficiency, high voltage, synchronous step-down DC-to-DC converter with integrated MOSFETs that operates over a wide input voltage range from 10V to 60V and delivers up to 50mA of load current. This device offers a converter solution with only three active pins.

The MAX77348 is an ultra-low quiescent current, noninverting buck-boost converter capable of supporting up to 3.5W output power. The device employs a unique control algorithm that seamlessly transitions between the buck, buck-boost, and boost modes, minimizing discontinuities and subharmonics in the output voltage ripple.