Electronicdesign 28380 Ldo Hi Out Promo Picture Promo
Electronicdesign 28380 Ldo Hi Out Promo Picture Promo
Electronicdesign 28380 Ldo Hi Out Promo Picture Promo
Electronicdesign 28380 Ldo Hi Out Promo Picture Promo
Electronicdesign 28380 Ldo Hi Out Promo Picture Promo

5 LDO Regulators with High Output Current

Aug. 21, 2019
High output current, also referred to as Iout, might be an important spec for your low-dropout (LDO) linear regulator.

Linear regulators use an internal transistor to control the output voltage. That transistor needs some headroom—you can’t get 5-V output with a 5.01-V input. That headroom is also called dropout. Hence, a low-dropout linear regulator can provide a regulated output even when the input voltage sags or is very close to your desired output voltage.

There are many specs to consider—input voltage range, output transient response, and output noise—but a fundamental spec you first need to ensure is adequate output current. Some LDOs produce a few milliamps of output, where others can supply 5 A. A regulator that produces more output current also needs a larger dropout voltage in order to work. The following positive-output parts have a low dropout as well has high output current.

1. The LT3070 from Analog Devices has 5-A output with 0.15-V maximum dropout. Maximum input is 3 V; output voltage is adjustable from 0.8 to 1.8 V.

2. The MIC69502 from Microchip Technology has 5-A output with 0.5-V maximum dropout. Maximum input is 5.5 V; output voltage is adjustable from 0.5 to 5.5 V.

3. The TPS756 from Texas Instruments has 5-A output with 0.5-V maximum dropout. Maximum input is 5.5 V; output voltage is 1.5, 1.8, 2.5, and 3.3 V, as well as a 1.22- to 3.3-V adjustable output part.

4. The SPX1585 from MaxLinear has 5-A output with 1.2-V maximum dropout. Maximum input is 10 V; output voltage is 1.5, 2.5, and 3.3 V or 1.27- to 8.8-V adjustable output part.

5. The AP1084 from Diodes Inc. has 5-A output with 1.4-V maximum dropout. Maximum input is 12 V, output voltage is 1.25 to 10.6 V.

If you need a lot of current to feed your next circuit design, be sure to check out these parts.

This is a new format for us and we’d love to get your feedback. If you would be willing to discuss this article with an editor, please email [email protected].

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!