Electronicdesign 27879 Ild8150 80v Led Driver Ic Dso 8 Ep Plain

80-V DC-DC Buck LED Driver IC with Hybrid Dimming Mode

July 19, 2019
Infineon’s ILD8150/E provides a high safety voltage margin for applications operating close to SELV limits.

Infineon Technologies AG has introduced the new LED driver IC ILD8150/E. It features an innovative hybrid dimming mode technology for achieving 0.5% of the target current. With a supply voltage range of 8 V dc up to 80 V dc, the driver IC provides a high safety voltage margin for applications operating close to safe extra-low voltage (SELV) limits, says the company. The driver IC is suitable for general and professional LED lighting applications with high dimming requirements.

The ILD8150/E offers a deep dimming performance without flicker and prevents audible noise. A PWM input signal between 250 Hz and 20 kHz controls the LED current in analog dimming output mode from 100 to 12.5% and from 12.5 to 0.5% in hybrid dimming mode, with a flicker-free modulation frequency of 3.4 kHz. The digital PWM dimming detection with high resolution and low power shutdown perfectly matches the ILD8150/E to microcontrollers, claims the company. The device also has a dim-to-off function and a pull-down transistor to avoid LED glowing in dim-to-off mode.

Infineon's new ILD8150/E drives up to 1.5 A using a high-side integrated switch. The latter with a low RDS(on) of 290 mΩ (ILD8150) enables high power designs with an efficiency of more than 95%. It incorporates a soft-start function to protect the primary stage from abrupt current requests and a shunt resistor for adjustable maximum output current. According to the company, precise output current accuracy of typically 3% from one device to another under all load and input voltage conditions makes the IC perfect for tunable white and flat-panel designs where current must be identical. Additionally, undervoltage lockout (UVLO) for the bootstrap voltage and overtemperature protection functions provide an ideal fit for professional LED lighting solutions.

Availability

The LED driver IC is packaged in a DSO-8 housing, which enables wave soldering. Higher thermal performance can be achieved with the ILD8150E in a DSO-8 package with an exposed pad. Both variants can be ordered now. More information is available at www.infineon.com/ild8150 and www.infineon.com/ild8150e.

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!