0117usbtestpromo.gif
0117usbtestpromo.gif
0117usbtestpromo.gif
0117usbtestpromo.gif
0117usbtestpromo.gif

Checking USB Power Delivery with a Low-Cost Protocol Analyzer

Jan. 13, 2017
Cypress Semiconductor’s CY4500 EZ-PD Protocol Analyzer handles USB 3 data and power protocols.
1. Cypress Semiconductor’s CY4500 EZ-PD Protocol Analyzer has a pair of Type-C connectors that allow the analyzer to sit between a device and host.

I was going to do a round-up of USB Power Delivery equipment and test tools, but as this one’s just too fun, it gets its own article. Cypress Semiconductor’s CY4500 EZ-PD Protocol Analyzer (Fig. 1) handles USB Power Delivery control and power protocols. It acts as a Type-C pass-through, allowing it to monitor VBUS, VCONN, and USB-PD traffic. A third, MicroUSB connector connects to a host PC that runs a Windows application to control the analyzer.

Inside the small box is a Cypress Semiconductor PSoC (Fig. 2). It also has hooks into the power system and the handshake system that control how power is routed and controlled, as well as how alternate connections are managed as well.

2. A Cypress Semiconductor 5LP PSoC powers the protocol analyzer.

The analyzer exposes the control signals (Fig. 3) just in case they are needed. Jumpers are included with the kit. Normally these are not needed.

3. The analyzer exposes the USB Type-C connections as well as a message header trigger.

Using the analyzer is extremely easy. Just plug it in and install the Windows-based EZ-PD Analyzer Utility application (Fig. 4). It is essentially a trace utility that captures every message, providing the details on the right side when a message is selected. Traces can be saved to a file.

4. The Windows-based EZ-PD Analyzer Utility application provides tracing and filtering support. (Click image to enlarge)

The Configuration Channel (CC) line is the signal that handles the handshake for power management and data connection configuration. The utility operation is simple: Just start and stop recording. Basic filtering is provided, making it possible to easily locate error events or other actions.

The analyzer and software are not on par with the typical USB test equipment available, but these cost a lot more. They are also more useful in tracking down errors—especially timing- and power-related issues that this analyzer will not address. On the other hand, for less than $200 developers can track the protocols being employed over the cable and identify issues related to the protocols. This can be handy given the potential complexity of issues like USB Power Delivery power distribution.

For more information check out the CY 4500-EZ-PD site.

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!