Date: Thursday, June 21, 2018
Time: 2:00 PM Eastern Daylight Time
Duration: 60 Minutes
If you want to learn about the multiphysics modeling of a welding process, then tune into this webinar featuring guest speaker Stuart Brown of Veryst Engineering.
Modeling a complex thermomechanical process, such as welding, requires the inclusion of several coupled physics phenomena.
This webinar describes how multiphysics modeling enabled a simulation of a valve welding process, which was needed to determine how a toxic leak developed. The numerical simulation allowed a rapid bounding analysis of the welding process and generated heat that affected the polymeric seals. The simulation included the physical processes of the deposition of weld metal, melting of the base metal, radiative heating due to the high-temperature plasma arc, and heat of fusion of the solidifying weld as well as tracing the weld path at different amounts of material deposition and sizes of fusion zone.
During the webinar, we will show how to create the model in the COMSOL Multiphysics® software, describe the actual toxic release event, and discuss the testing that was done to correlate with the numerical simulation results. The webinar will conclude with a Q&A session.
Dr. Stuart Brown is the managing partner of Veryst Engineering®, LLC, an engineering consulting firm located in the Boston area. Veryst provides services in product design, manufacturing processes, and failure analysis. Dr. Brown’s technical background includes mechanical engineering and materials science. He has consulted in manufacturing processes including metal and polymer manufacturing processes, semisolid materials, extrusion, powder metallurgy, drawing, forging, welding, and cold and hot rolling; using engineering analysis; computational modeling; experimentation; and materials characterization. He also has extensive research and development experience in thin films and microelectromechanical systems (MEMS). Prior to founding Veryst Engineering, Dr. Brown was the director of the Boston office of Exponent, Inc. Before Exponent, Dr. Brown was on the faculty of the Department of Materials Science and Engineering at MIT.
Veryst Engineering is a registered trademark of Veryst Engineering, LLC
Manager, Heat Transfer Module
Nicolas Huc joined COMSOL France in 2004 and is currently the head of their development team. He is also the manager of the Heat Transfer Module. Nicolas studied engineering at ENSIMAG before receiving his PhD in living system modeling from Joseph Fourier University