Use A Boost Converter To Create An Auto-Dimmable LED Flashlight

July 24, 2008
Due to their light output and long life, high-brightness LEDs are well-suited for use in flashlights. Typically, the LEDs are driven with a constant current. So when the battery voltage drops, the flashlight just stops working. In some situati

Due to their light output and long life, high-brightness LEDs are well-suited for use in flashlights. Typically, the LEDs are driven with a constant current. So when the battery voltage drops, the flashlight just stops working. In some situations, this could be dangerous. It would be nice to have a flashlight that would automatically dim when the battery voltage drops. Just like a traditional flashlight, it would indicate a low-battery condition and would last longer.

Typically, the forward voltage of a white LED is 3 to 5 V. Therefore, if the input voltage drops below 3 V, a boost converter can drive the LED. Figure 1 shows such a boost converter with automatic dimming based on battery voltage.

The L6920D is a high efficiency step-up controller requiring very few external components to convert the battery voltage to the selected output voltage or current. The device will start up at 1 V and operate down to 0.6 V. Its quiescent current is only 10 µA. The device also includes an internal synchronous rectifier implemented with a 120-m? P-channel MOSFET, which replaces the conventional boost diode, to improve the efficiency.

In this circuit, the LED current (ILED) is a function of the battery voltage (VFB). When the battery voltage drops, the LED current drops. In this way, the battery can last longer, and the flashlight will offer dimming characteristics. Assuming VFB = 1.23 V, determined by the L6920D:

If R5 >> R4, then R5||R4 ˜ R4, then:

Finally:

Figure 2 shows the resulting LED current calculated using the resistance values in the example circuit.

We compared a constant LED flashlight and this auto-dimming version, using two AAA batteries. Running times were 50 and 90 minutes, respectively. The auto-dimming function nearly doubled the battery life and provided a warning when the battery voltage dropped.

Sponsored Recommendations

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

How to Quickly Leverage Bluetooth AoA and AoD for Indoor Logistics Tracking

March 27, 2024
Real-time asset tracking is an important aspect of Industry 4.0. Various technologies are available for deploying Real-Time Location.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!