electronica 2006 UPDATE: 15.11.2006Avago Technologies Introduces Industry's Thinnest and Smallest Surface-Mount ChipLED Lamps in a Standard Package

Nov. 15, 2006
Lamps support thinner handset designs without the complications and cost of EL lighting.

San Jose, Calif.
Avago Technologies today introduced the industry's thinnest surface mount (SMT) light emitting diodes (LEDs) in the smallest industry-standard (0603) footprint available. With an ultra small form factor about the size of a pencil tip, these low-power LEDs use high-brightness chips to provide excellent illumination with minimum current consumption. These new ChipLED lamps from Avago are available in blue and phosphor white — the colors most widely used by handset manufacturers.

Avago's ultra-thin HSMR-CL25 (Blue) and HSMW-CL25 (White) LEDs are ideal for backlighting keypads and status indicators in the thinnest handsets, as well as for office automation devices and consumer electronics. Moreover, these new top emitting LED packages represent a lower-cost alternative to electroluminescent (EL) backlighting, eliminating the need for high voltages and difficulties with high-frequency electrical noise.

By introducing the world's thinnest top emitting surface mount LEDs in an industry-standard ChipLED package configuration, designers can develop even smaller and thinner mobile handsets, handheld games and other miniature devices.

The Avago HSMR-CL25 is indium gallium nitride (InGaN) blue, with 473-nm dominant wavelength and 11.2-45-mcd luminous intensity; the HSMW-CL25 is InGaN phosphor white with 28.5-112.5-mcd luminous intensity. All intensities are typical, measured at 5 mA drive current, and all packages use diffused optics. The top emitting package, with its wide viewing angle, is suitable for direct backlighting or use with light pipes. The package is compatible with infrared (IR) reflow soldering and Avago's precision manufacturing techniques ensure perfect pick-up by automated manufacturing equipment. Special leadframe construction of the HSMx-CL25 lead-free Avago ChipLED package series provides efficient transfer of heat away from the LED chip, to permit operation over the -40°C to +85°C temperature range. The package dimensions are 1.6 mm (L) by 0.8 mm (W) by 0.25 mm (H).

U.S. Pricing and Availability
Avago's HSMR-CL25, and HSMW-CL25 ultra-thin ChipLEDs are priced at $0.14 in 10,000-piece quantities. They are supplied in 8-mm tape on 7-inch (178 mm) diameter reels for compatibility with automated manufacturing. Samples and production quantities are available now through Avago's direct sales channel and worldwide distribution partners.


To join the conversation, and become an exclusive member of Electronic Design, create an account today!