Electronicdesign 4005 Xl 05 Parade 3 0
Electronicdesign 4005 Xl 05 Parade 3 0
Electronicdesign 4005 Xl 05 Parade 3 0
Electronicdesign 4005 Xl 05 Parade 3 0
Electronicdesign 4005 Xl 05 Parade 3 0

Chips Bridge LVDS to DisplayPort

Dec. 15, 2010
Bridging the transition from LVDS to DisplayPort interfaces in notebook and all-in-one computers, the PS8615 chip converts single- or dual-link DisplayPort inputs into single or dual link LVDS outputs, supporting display resolutions up to 1920x1200 (at 60Hz), while the PS8612 converts a single lane DisplayPort signal to LVDS, which supports display resolutions up to 1680x1050 (at 60Hz).

Bridging the transition from LVDS to DisplayPort interfaces in notebook and all-in-one computers, the PS8615 chip converts single- or dual-link DisplayPort inputs into single or dual link LVDS outputs, supporting display resolutions up to 1920x1200 (at 60Hz), while the PS8612 converts a single lane DisplayPort signal to LVDS, which supports display resolutions up to 1680x1050 (at 60Hz). Both devices require a single 3.3V supply and integrate a voltage-switching regulator to power 1.2V core circuitry, eliminating the need for external regulators. Power consumption is less than 200 mW in typical applications. Both devices also incorporate Parade’s crystal-free technology, eliminating the need for an external crystal or clock reference. The PS8612 is available in a 48-pin QFN RoHS package and will be priced at $1.75 each in high volume. The PS8615 is available in a 56-pin QFN RoHS package and will be priced at $2.50 each in high volume. PARADE TECHNOLOGIES INC., San Jose, CA. (408) 329-5540.

Sponsored Recommendations

Understanding Thermal Challenges in EV Charging Applications

March 28, 2024
As EVs emerge as the dominant mode of transportation, factors such as battery range and quicker charging rates will play pivotal roles in the global economy.

Board-Mount DC/DC Converters in Medical Applications

March 27, 2024
AC/DC or board-mount DC/DC converters provide power for medical devices. This article explains why isolation might be needed and which safety standards apply.

Use Rugged Multiband Antennas to Solve the Mobile Connectivity Challenge

March 27, 2024
Selecting and using antennas for mobile applications requires attention to electrical, mechanical, and environmental characteristics: TE modules can help.

Out-of-the-box Cellular and Wi-Fi connectivity with AWS IoT ExpressLink

March 27, 2024
This demo shows how to enroll LTE-M and Wi-Fi evaluation boards with AWS IoT Core, set up a Connected Health Solution as well as AWS AT commands and AWS IoT ExpressLink security...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!