Researchers Investigate Sintering Process In Quest To Develop Stronger Metals

June 12, 2000
Scientists at Ames Laboratory, Ames, Iowa, have developed a nondestructive ultrasonic technique for observing the sintering of powdered metal components. Sintering involves pouring a metal powder into a die, which is then pressed and heated until...

Scientists at Ames Laboratory, Ames, Iowa, have developed a nondestructive ultrasonic technique for observing the sintering of powdered metal components. Sintering involves pouring a metal powder into a die, which is then pressed and heated until the powdered particles bond together as a solid mass. By studying this process, Ames' scientists hope to better understand the interactions that influence a metal's strength. This would allow them to control the process to create stronger metals.

Ames' technique uses a commercial, custom-built electromagnetic acoustic transducer (EMAT) (see the figure). The EMAT unit is composed of two pairs of permanent magnets and electrical coils—one placed on either side of a pressed powder metal part as it rests in a sintering furnace. The magnetic and electrical fields produce the eddy currents that create sound waves inside the metal.

Once inside the sample, sound pulses respond to the strength of the metal's bonds by dying out when bonds are weak. Or, they bounce back and forth in a pinball-like fashion when bonds are strong. As the sound waves exit the sample, they produce an electrical voltage in combination with the magnetic field. The voltage can be measured with an oscilloscope and observed on a computer monitor.

This technique lets scientists evaluate the bonds at work in powdered metals in real time. In turn, this helps them determine when the time and temperature are ideal to create powdered metal parts strong enough to handle maximum loads. While the technique is still in development, early tests prove that the scientists may be on the right track to uncovering and modeling the factors that affect a metal's strength.

Sponsored Recommendations

What are the Important Considerations when Assessing Cobot Safety?

April 16, 2024
A review of the requirements of ISO/TS 15066 and how they fit in with ISO 10218-1 and 10218-2 a consideration the complexities of collaboration.

Wire & Cable Cutting Digi-Spool® Service

April 16, 2024
Explore DigiKey’s Digi-Spool® professional cutting service for efficient and precise wire and cable management. Custom-cut to your exact specifications for a variety of cable ...

DigiKey Factory Tomorrow Season 3: Sustainable Manufacturing

April 16, 2024
Industry 4.0 is helping manufacturers develop and integrate technologies such as AI, edge computing and connectivity for the factories of tomorrow. Learn more at DigiKey today...

Connectivity – The Backbone of Sustainable Automation

April 16, 2024
Advanced interfaces for signals, data, and electrical power are essential. They help save resources and costs when networking production equipment.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!