OCXO Passes Muster In Military Vibration And Stability Tests

Feb. 16, 2006
The Department of Defense is looking for a few good oven-controlled crystal oscillators (OCXOs). It demands improved phase noise to meet the needs of the next generation of radar, navigation, and secure communications systems. Frequency accuracy and stab

The Department of Defense is looking for a few good oven-controlled crystal oscillators (OCXOs). It demands improved phase noise to meet the needs of the next generation of radar, navigation, and secure communications systems. Frequency accuracy and stability are essential to the success of the new Communications, Navigation and Identification (CNI) softwaredefined radio platforms.

The 9633 from Symmetricom answers the call (see the figure). It's designed for stringent military applications where stability under severe vibration and shock are essential. At the heart of this acceleratedcompensated OCXO, the unit's oscillator uses an SC-cut quartz resonator running at 10 MHz.

The output is a sine wave at 7.0 ±2 dBm with a 50-Ω impedance. The harmonic output is down to ?35 dBc, and nonharmonic energy is down to ?80 dBc. The 9633's typical frequency stability is 5 × 10-12 with aging per day of 3 × 10-10. The acceleration sensitivity per g (gamma) is less than 2 × 10-11. The operating temperature ranges from ?40°C to 55°C. The output frequency is tunable by ±1 × 10-8 via an external I2C port. Its dc power requirement is 3 W at 15 V.

Contact the company for pricing. Symmetricon Inc.
www.ocxo.symmsda.com

Sponsored Recommendations

The Importance of PCB Design in Consumer Products

April 25, 2024
Explore the importance of PCB design and how Fusion 360 can help your team react to evolving consumer demands.

PCB Design Mastery for Assembly & Fabrication

April 25, 2024
This guide explores PCB circuit board design, focusing on both Design For Assembly (DFA) and Design For Fabrication (DFab) perspectives.

What is Design Rule Checking in PCBs?

April 25, 2024
Explore the importance of Design Rule Checking (DRC) in manufacturing and how Autodesk Fusion 360 enhances the process.

Unlocking the Power of IoT Integration for Elevated PCB Designs

April 25, 2024
What does it take to add IoT into your product? What advantages does IoT have in PCB related projects? Read to find answers to your IoT design questions.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!