Compact Module Taps COM Express Atoms For Mobile Video

Nov. 7, 2008

Congatec’s latest COM Express module, the conga-CA945, is based on Intel’s 1.6-GHz, two-thread N270 Atom processor and 945GSE Express chip set (see the figure). The module can handle up to a 2-Gbyte DDR2 small-outline dual-inline memory

William G. Wong

Congatec’s latest COM Express module, the conga-CA945, is based on Intel’s 1.6-GHz, two-thread N270 Atom processor and 945GSE Express chip set (see the figure). The module can handle up to a 2-Gbyte DDR2 small-outline dual-inline memory module (SODIMM). It has a Gigabit Ethernet controller, three PCI Express lanes, eight USB 2.0 ports, two SATA ports, and an IDE interface.

Furthermore, the conga-CA945 has a 32-bit PCI bus, a multimaster I2C port, an LPC bus, and hi-def audio support. The 945SGE’s Graphics Media Accelerator 950 can provide 32-bit 3D graphics using dual-channel LVDS, a serial digital video output (SDVO), or a video graphics adapter (VGA) interface. It implements the Embedded Panel Interface (EPI) and VESA ID standard. A typical system draws under 2.5 W.

The conga-CA945 costs $290. Samples will be available later this month.

Bill Wong

CONGATEC • www.congatec.com

About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form.

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below.

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence.