Gate driver IC suits electric and hybrid vehicles

International Rectifier announces the AUIRS2332J 600-V three-phase gate driver IC for automotive high-voltage motor drives for electric (EV) and hybrid electric vehicle (HEV) applications. The AUIRS2332J, high-voltage, high speed power MOSFET and IGBT driver features three independent high and low-side referenced output channels. Proprietary HVIC technology enables ruggedized monolithic construction with logic inputs compatible with CMOS or LSTTL outputs, down to 3.3 V logic.

The device also features an integrated ground-referenced operational amplifier to provide analog feedback of the bridge current via an external current sense resistor, current trip function, and open drain FAULT signal to indicate over-current or under-voltage shutdown. The IC is housed in a PLCC44 package, providing higher creepage distances between high voltage pins, simplifying PCB layout.

The AUIRS2332J is fully characterized for negative transients on the switching node that may occur during normal operation and protection mode for increased system robustness. The device’s output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The floating channel can be used to drive N-channel power MOSFET or IGBT in the high-side configuration.

The company's automotive-grade IC products are subject to dynamic and static part average testing combined with 100% automated wafer level visual inspection. The devices are qualified according to AEC-Q100 standards and feature an environmentally friendly, lead-free, and RoHS compliant bill of materials.

For more information, contact International Rectifier, 233 Kansas St., El Segundo, CA 90245. Phone: (310) 252-7105.