Promo 371396 Raq Img 193
Promo 371396 Raq Img 193
Promo 371396 Raq Img 193
Promo 371396 Raq Img 193
Promo 371396 Raq Img 193

3 Options for Optimizing Power-Converter Control Loops

Jan. 26, 2022
By applying any of the three methods discussed in this article to optimize the compensation of a switching regulator, compensation of any power supply is possible.

Members can download this article in PDF format.

What you'll learn:

  • What is the role of a control loop?
  • Three approaches to selecting compensation components for switching regulators.

Almost every power supply has a control loop to maintain the output voltage at a constant value. In the design of a power supply, the aim is to optimize the control loop so that if the input voltage or load transients experience fluctuations, the deviations in the controlled output voltage from the setpoint are minimized.

An important relationship in this case is the size of the output capacitors in relation to the response speed of the switching regulator IC. If the loop’s response is particularly fast, smaller output capacitors can be used while keeping the output voltage within the permissible range. Thus, optimization of the switching regulator’s response speed reduces system cost as well as the space requirement for the circuit because smaller output capacitors can be used.

With most switching regulator ICs, there’s a compensation pin, frequently called ITH or VC, for control-loop adjustment. With skillful selection of capacitances and resistances, poles and zeros can be added to the transfer function of the control loop to ensure optimal dynamic performance and high control-loop stability. But how are these compensation components selected?

Three approaches can be taken:

1. Manual calculation with data gleaned from the datasheet

The first method uses the calculation formulas in the datasheet for a switching regulator IC. A stabilization concept is proposed in consideration of one selected power stage. Figure 1 shows an LTC3311 IC with the corresponding ITH pin and suitable compensation components.

2. Use a design tool  

The second way to find a suitable transfer function setting involves using a design tool such as LTpowerCAD to calculate the external components. This approach provides additional insight into the control loop response.

Figure 2 shows the LTpowerCAD user interface with a graphical representation of the control loop in a Bode plot, as well as the response of the output voltage to load transients in the time domain. The ITH setting values can be comfortably varied, and an optimal setting can be found with this method.

There’s a saying from Goethe that “all theory is gray.” In practice, parasitic components should be accounted for and checked before development transitions to mass production. The compensation components that have already been selected are connected to the ITH pin. In addition, load transient tests are performed to check whether the voltage change at VOUT is within the permissible range and whether the voltage converter is working in a stable manner.

This hardware test only checks one setting option for compensation. However, its possible that the setting can be optimized with slightly modified values. To find this out, all kinds of soldering work has to be done on the hardware because the external components must be changed with new values to find the optimal compensation component combination.

3. The elegant approach: Using a preconfigured RC network

Figure 3 shows a third, elegant way to solve this problem using a preconfigured RC network. The LB013A board from Analog Devices is a small circuit board on which a simple switchable and adjustable RC network is implemented.

The total capacitance and resistance values can be changed through actuation of small switches and rotation of potentiometers. The laborious soldering of compensation modules is done away with and the compensation setting can be optimized in real-time during a load transient test. A circuit board such as the LB013A is easy to make, but it also can be purchased from the company.

By applying any of these three methods to optimize the compensation of a switching regulator, compensation of any power supply is possible.

Sponsored Recommendations

Highly Integrated 20A Digital Power Module for High Current Applications

March 20, 2024
Renesas latest power module delivers the highest efficiency (up to 94% peak) and fast time-to-market solution in an extremely small footprint. The RRM12120 is ideal for space...

Empowering Innovation: Your Power Partner for Tomorrow's Challenges

March 20, 2024
Discover how innovation, quality, and reliability are embedded into every aspect of Renesas' power products.

Article: Meeting the challenges of power conversion in e-bikes

March 18, 2024
Managing electrical noise in a compact and lightweight vehicle is a perpetual obstacle

Power modules provide high-efficiency conversion between 400V and 800V systems for electric vehicles

March 18, 2024
Porsche, Hyundai and GMC all are converting 400 – 800V today in very different ways. Learn more about how power modules stack up to these discrete designs.