Electronic Design
Coin Cell Holders Squeeze Into Tight Quarters

Coin Cell Holders Squeeze Into Tight Quarters

The BV-1632 and BV-1632-G vertical battery holders for CR1632, BR1632, or DL1632 size batteries are particularly suitable for use in single-board computers with tight space constraints. They measure less than 14 mm in height on top of the PCB and under 19-mm long and 5-mm thick. Typically CR2032 vertical battery holders range from 23 mm to 26 mm above the PCB. The holder snaps onto standard 0.062” thick PCBs using three plastic latches and four solder points to ensure stability under any conditions. The plastic bodies of the holders are made of glass filled nylon and the positive and negative contacts are phosphor-bronze with nickel or gold over nickel plating. For further information, contact Tom Blaha at MEMORY PROTECTION DEVICES INC., Farmingdale, NY (631) 249-0001.


TAGS: Components
Hide comments


  • Allowed HTML tags: <em> <strong> <blockquote> <br> <p>

Plain text

  • No HTML tags allowed.
  • Web page addresses and e-mail addresses turn into links automatically.
  • Lines and paragraphs break automatically.