Rohde Schwarz Blocking Test 1200x400 5e287fda93103

Verifying RF device performance with a blocking test

Jan. 22, 2020
Learn more with Rohde & Schwarz in verifying RF device performance with a blocking test.

The increasing density of devices, machines, systems and vehicles using wireless connectivity solutions can pose a  great challenge for a new Wi-Fi module due to the presence of interfering signals. A wireless receiver’s ability to  receive a wanted signal in the presence of an interfering signal is described by blocking characteristics. These characteristics are also known as desensitization performance since they have a considerable impact on receiver sensitivity. Blocking tests are therefore crucial for determining whether a receiver works as it should.

Learn more

Sponsored

Explore Raspberry Pi’s imaging and AI tools in this free webinar with expert insights from Naushir Patuck. Register now to attend live or watch the recording later.
Whether you’re a beginner or an enthusiast, our free pocket guide, spanning roughly 60 pages, offers a broad insight into satellite technologies in one handy place. From clear...
This white paper describes the basic functionality of antennas. Starting with Hertz's Antenna model followed by a short introduction to the fundamentals of wave propagation, the...
TE Connectivity AMP’s mezzanine connectors include Micro MaTch, Free Height & MICTOR SB connectors all available at Digi-Key. Same day shipping!