• Rtp Oscilloscope Test And Measurement 1200x900 5ea730514bb54

    Comparison of jitter measurements in the time and frequency domain

    April 27, 2020
    When analyzing the robustness of data transmission systems, jitter is a key indicator. It is recommended to use jitter measurement instruments for both the time and frequency domain in order to differentiate between fast and slow moving artifacts.
    Rs Logo Logotype Claim Rgb Silver Resized

    The R&S®RTO digital oscilloscope and the R&S®FSWP phase noise analyzer measure jitter signals (TIE) comparably and precisely – the R&S®RTO in the time domain, the R&S®FSWP in the frequency domain. The R&S®RTO offers more capability with additional results such as duty cycle or data dependent jitter and analysis of fast transient signals at limited sensitivity. The R&S®FSWP offers easy separation of periodic and random jitter at an unbeatable sensitivity of a few fs. The R&S®RTO and the R&S®FSWP complement one another well and present an ideal solution for jitter measurements.

    Continue Reading

    Sponsored

    The advent of USB Type-C marked a turning point in connectivity. This compact, reversible connector has transformed the way we exchange data and power our devices, offering accelerated...
    The Same Sky interconnect group carries a comprehensive line of connectors to reduce the burden on the design engineer. Their wide selection of mechanical configurations and simple...
    Explore ADAM, an advanced AMR demo by Analog Devices, featuring precision depth sensing, AI mapping, 4-wheel motor control, ROS support, and smart battery & comms. Boost safety...
    In a generic electronic system there are some inputs that are controlled by the end user. These inputs are read by electronics and acted upon by using outputs.