Control Loop Stabiliy 1200x900 5ebd976c5d40d

AppNote: Tips and Tricks on how to verify control loop stability

May 18, 2020
The Rohde & Schwarz application note describes how to measure the control loop stability of switch-mode power supplies to get the best performance and confidence of the design.

It will explain the main measurement concept and will guide the user during the measurements and mention the main topics in a practical manner. Wherever possible, a hint is given where the user should pay attention to it to avoid weak measurements. The Rohde and Schwarz buck converter reference board was designed in collaboration with Texas Instruments and is used to illustrate the closed loop measurement in a practical manner.

Sponsored

What is the Most Effective Way to Commutate a BLDC Motor?

Brushless direct current electric motors, or BLDC motors for short, are electronically commutated motors powered by a dc electric source via an external motor controller. Unlike...

MEMS versus ECM: Comparing Microphone Technologies

Increasing numbers of devices utilize microphones to capture sound. Two of the most commonly used microphone technologies are MEMS and ECM.

A Deep Dive into Audio Jack Switches and Configurations

The audio jack is an industry-standard connector that has many potential uses in addition to providing basic audio connectivity.

Power Topologies Handbook

Buy ICs, tools & software directly from TI. Request samples, enjoy faster checkout, manage orders online and more with your myTI account.