• Featured Image 5f7358718c55b

    Vector Mixer Measurements

    Sept. 29, 2020
    As the demand for high frequency applications increases, RF components such as mixers and filters play a critical role in most RF system design. The vector mixer calibration method allows for measurement of mixer transmission complex S-parameters.
    Cmt Horizontal Rgb Dark Text
    As the demand for high frequency applications increases, RF components such as mixers and filters play a critical role in most RF system design. The vector mixer calibration method allows for measurement of mixer transmission complex S-parameters including phase and group delay of the transmission coefficient. The vector mixer calibration method ensures a matching frequency at both test ports of the analyzer, in normal operation mode. The vector mixer calibration procedure will be outlined in this app note.

    Continue Reading

    Sponsored

    Stricter guidelines imposed by version 3 of the IEC standard for harmonic current emissions push designers to embrace power-factor-correction methodologies.
    The flyback topology is a versatile, widely used, switched-mode power-supply design with some interesting characteristics that brings performance and BOM advantages to many applications...
    High output current, also referred to as Iout, might be an important spec for your low-dropout (LDO) linear regulator.
    Designing power supplies that work from wall outlets has multiple challenges. This FAQ should answer many of your questions.