Op Amp Drives SAR ADCs To True Zero

Sept. 26, 2011
The LTC6360 operational amplifier can drive 16- and 18-bit SAR ADCs to 0V while maintaining high linearity on a single +5V supply.

The LTC6360 operational amplifier can drive 16- and 18-bit SAR ADCs to 0V while maintaining high linearity on a single +5V supply. An integrated ultralow noise charge pump provides an internal negative rail, eliminating the need for a negative supply. Input offset voltage is less than 250 µV and noise is 2.3nV/√Hz.  The device settles to 16-bits in 150 ns and achieves a closed loop -3-dB bandwidth of 250 MHz.  Harmonic distortion (HD2/HD3) is -103dBc/-109dBc at fIN = 40 kHz. The output is designed to drive a series 10? resistor and 330-pF capacitor filter network, although larger load capacitances can be driven. Available in MSOP and 3 mm x 3 mm DFN 8-pin packages, prices start at $2.19 each/1,000. LINEAR TECHNOLOGY CORP., Milpitas, CA. (800) 454-6327.      

About the Author

Staff

Articles, galleries, and recent work by members of Electronic Design's editorial staff.

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!