Armstrong and Sarnoff, 101 Years Ago

Jan. 30, 2014
"validation of the regenerative detector was a significant inflection point in the history of communication.

Sixty-one years ago, on January 31, 1954, Edwin Armstrong, who invented the regenerative, super regenerative, and superheterodyne detector circuits for continuous-wave and amplitude modulation and the whole art of frequency modulation broadcasting, killed himself by leaping from a window in his New York apartment.

Almost exactly 41 years earlier, Armstrong, accompanied by Professor Morecroft from Columbia University, demonstrated his regenerative receiver to David Sarnoff and Roy Weagant of The American Marconi Company at the Marconi Belmar receiving station.

Ultimately, Armstrong’s relationship with Sarnoff and RCA was, to say the least, adversarial, (See the Wikipedia bio above.) and many of my engineer friends blame Sarnoff for Armstrong’s suicide.

Nevertheless, the event 101 years ago, the validation of the regenerative detector was a significant inflection point in the history of communication.

Which takes us to infoage.org, which is the on-line presence of the InfoAge Science History Museum and National Landmark, which happens to be the site of The American Marconi Belmar receiving station, which was later Camp Evens, a military base, then an RCA facility, and then an Army research facility. In other words, the place is steeped in the history of 20th century electronics engineering.

Okay, the date is a centennial-plus-one, but there are things happening to mark the date of the validation of Armstrong’s regenerative receiver circuit, and they’re not happening until next weekend. (It’s hard to compete with the SuperBowl.) If you’re in the New York/New Jersey area, you should check them out

Essentially, The New Jersey Antique Radio Club’s Radio Technology Museum at the site will host an observance of the occasion at the InfoAge Museum in Wall Township, NJ on February 8th and 9th from 1 to 5 PM.  There will be a display and demonstration of vintage regenerative radio receivers with a formal presentation at 3 PM.  The other InfoAge museums will be open as well.  Admission is free, but five-dollar donation to is suggested.

Working receivers on display will include a mock-up of Armstrong’s original circuit receiving a simulated spark radio-telegraph transmission and a WWI era naval receiver.  This receiver, a Wireless Speciality Apparatus Company IP-501, can be operated both as a crystal set (passive receiver) similar to the Marconi 101 and as an Armstrong regenerative set using a vacuum tube to provide amplification, and will give a feel for the receivers involved in the 1914 demonstration.

Even if you don’t go, take a look at the event Webpage.  It includes a replica of Sarnoff’s assessment of the demonstration, and given the events of the ensuing 40 years, and Armstrong’s ultimate posthumous patent victories, it’s a moving piece of tragic irony.

Also, if you morse code proficiency is good at around 20 words/minute, you can start now by going to Ustream and trying yourself out on a test video:

What you will see on the video is a 1918 IP-501 receiver operating in the Armstrong

regenerative mode, with an audio track emulating the same signals from the Salby-Arco

alternator in Nauen, Germany that Armstrong and Sarnoff heard 101 years ago.

Sponsored Recommendations

The Importance of PCB Design in Consumer Products

April 25, 2024
Explore the importance of PCB design and how Fusion 360 can help your team react to evolving consumer demands.

PCB Design Mastery for Assembly & Fabrication

April 25, 2024
This guide explores PCB circuit board design, focusing on both Design For Assembly (DFA) and Design For Fabrication (DFab) perspectives.

What is Design Rule Checking in PCBs?

April 25, 2024
Explore the importance of Design Rule Checking (DRC) in manufacturing and how Autodesk Fusion 360 enhances the process.

Unlocking the Power of IoT Integration for Elevated PCB Designs

April 25, 2024
What does it take to add IoT into your product? What advantages does IoT have in PCB related projects? Read to find answers to your IoT design questions.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!