Full Sized Rocker Switch Withstands High Impact Forces

June 25, 2012
CW Industries has developed a new rocker switch to withstand external high impact forces normally associated with lawn and garden applications such as kill switches in generators, power washers or pull start engine applications where the recoil of the pull start mechanism could adversely affect switch performance due to mechanical impact.

CW Industries has developed a new rocker switch to withstand external high impact forces normally associated with lawn and garden applications such as kill switches in generators, power washers or pull start engine applications where the recoil of the pull start mechanism could adversely affect switch performance due to mechanical impact.

Rated at 16 amps, with higher currents available, the CW GRHI - 2000 series is a Full Size, SPST and SPDT Rocker Switch made with a high impact thermoplastic blend that has been field tested and approved for applications where the likelihood of switch impact and mechanical failure is prevalent. The switch can be mounted securely in a .550''x1.125'' panel opening requiring no screws or other fasteners. The standard switch includes a black housing and rocker knob but can also be molded in a wide range of colors and special markings to suit your specific requirements.

The CW switch encompasses optional drain holes which allow for the removal of water, condensation and other incidental moisture prevalent in these outdoor environments. Our patented unique contact sliding and rotating action ensures contact cleanliness and extended life.

CW Industries
Part Number: GRHI-2000

Sponsored Recommendations

TTI Transportation Resource Center

April 8, 2024
From sensors to vehicle electrification, from design to production, on-board and off-board a TTI Transportation Specialist will help you keep moving into the future. TTI has been...

Cornell Dubilier: Push EV Charging to Higher Productivity and Lower Recharge Times

April 8, 2024
Optimized for high efficiency power inverter/converter level 3 EV charging systems, CDE capacitors offer high capacitance values, low inductance (< 5 nH), high ripple current ...

TTI Hybrid & Electric Vehicles Line Card

April 8, 2024
Components for Infrastructure, Connectivity and On-board Systems TTI stocks the premier electrical components that hybrid and electric vehicle manufacturers and suppliers need...

Bourns: Automotive-Grade Components for the Rough Road Ahead

April 8, 2024
The electronics needed for transportation today is getting increasingly more demanding and sophisticated, requiring not only high quality components but those that interface well...

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!