MIPS SoC Does Double Duty

May 27, 2002
Two high-speed Ethernet ports and two 16550 serial ports do wonders with the MIPS-based Vr7700 core in NEC's new Vr7701 system-on-a-chip (SoC). Running at 400 MHz, the Vr7701 has plenty of horsepower for high-performance embedded network applications...

Two high-speed Ethernet ports and two 16550 serial ports do wonders with the MIPS-based Vr7700 core in NEC's new Vr7701 system-on-a-chip (SoC). Running at 400 MHz, the Vr7701 has plenty of horsepower for high-performance embedded network applications such as routers and network RAID devices.

The chip incorporates a level 2 cache with independent I/O and CPU access with a sustained 1087-Mbyte/s bandwidth. Running at 200 MHz, the cache contains 256 Mbytes of ECC memory. A built-in 133-MHz SDRAM controller supports 64-bit double-data-rate (DDR) SDRAM.

Additional peripherals can be accessed via the 64-bit, 133-MHz PCI-X interface. A multiplexed 33-MHz, 32-bit local bus interface also is available. The 64-bit superscaler processor implements the MIPS IV instruction set and the new MIPS 64 instructions. Debugging is available via JTAG and N-wire interfaces.

The chip is based on 0.13-µm, 1.5-V technology. Its core is compatible with the NEC Vr5500, which supports Wind River VxWorks, MontaVista Linux, and Microsoft Windows CE. Available in June, the Vr7701 comes in a 500-pin advanced ball-grid array (ABGA) package. It costs under $100 in quantities.

NEC, www.nec.com; (800) 338-9549.

See associated figure

About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form. 

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below. 

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.  

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence. 

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!