Mac-Switch And MINI-PCI Adapter Bolster PC-104+ Apps

Oct. 8, 2008
For embedded PC-104+ designs, the 4I71 is a stackable PC/104+ card that combines a 100 BaseT Ethernet MAC with a nine-port switch while the 4I72 embarks as a quad type III Mini-PCI adapter for the PC/104+ (PCI-ONLY) bus. The 4I71 promises to eliminate

For embedded PC-104+ designs, the 4I71 is a stackable PC/104+ card that combines a 100 BaseT Ethernet MAC with a nine-port switch while the 4I72 embarks as a quad type III Mini-PCI adapter for the PC/104+ (PCI-ONLY) bus. The 4I71 promises to eliminate the awkward power or mechanical problems common to consumer type Ethernet switches. Its eight Ethernet ports support auto negotiation, allowing connections with half- and full-duplex, 10 and 100 BaseT devices plus auto MDX, eliminating the need for crossover cables. The Ethernet MAC is a Micrel 8842P featuring hardware TCP checksum calculation. Drivers are available for most operating systems and the switch has sufficient bandwidth to support full duplex wire speed connections on all ports. The 4I72 allows deployment of four Mini-PCI cards, i.e., IEEE 802.11 wireless LAN cards, in a PC/104+ system. It employs a PCI bridge so that only one PC/104+ slot is necessary. The PCI bridge also isolates the Mini-PCI cards from the system, allowing the use of MiniPCI cards in systems with 5V busses. Jumpers select which PC104+ slot the 4I72 occupies. Prices for the 4I71 and 4I67 are $147 and $108 ieach/100+, respectively. MESA ELECTRONICS, Richmond, CA. (510) 223-9272.

Company: MESA ELECTRONICS

Product URL: Click here for more information

Sponsored Recommendations

The Importance of PCB Design in Consumer Products

April 25, 2024
Explore the importance of PCB design and how Fusion 360 can help your team react to evolving consumer demands.

PCB Design Mastery for Assembly & Fabrication

April 25, 2024
This guide explores PCB circuit board design, focusing on both Design For Assembly (DFA) and Design For Fabrication (DFab) perspectives.

What is Design Rule Checking in PCBs?

April 25, 2024
Explore the importance of Design Rule Checking (DRC) in manufacturing and how Autodesk Fusion 360 enhances the process.

Unlocking the Power of IoT Integration for Elevated PCB Designs

April 25, 2024
What does it take to add IoT into your product? What advantages does IoT have in PCB related projects? Read to find answers to your IoT design questions.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!