Fingerprint Sensor Integrates With Trusted Pre-Boot Authentication Systems

Oct. 26, 2006
Fujitsu's Full Speed USB 2.0-based MBF320 Sweep Sensor uses the TrustedCore preboot authentication (PBA), fingerprint-matching algorithms, and biometric software from Cogent Systems. The ultra-thin (16 by 6.5 by 0.9 mm) capacitive sensor has

Fujitsu's Full Speed USB 2.0-based MBF320 Sweep Sensor uses the TrustedCore preboot authentication (PBA), fingerprint-matching algorithms, and biometric software from Cogent Systems. The ultra-thin (16 by 6.5 by 0.9 mm) capacitive sensor has a hardened surface that can handle rugged environments. It provides 500-dpi resolution and 8-bit grayscale. Also, it consumes only 45 mW as well as only 150 µA in standby auto-finger-detect mode from 3.0 to 3.6 V. The unit provides advanced Auto-Finger Detection (AFD) circuit support along with an 8-bit analog-to-digital-converter. It supports a 24-MHz serial peripheral interface (SPI) in addition to USB 2.0. It's available in a 43-pin plastic fine-pitch ball-grid array with a patented "finger-guide" feature. Pricing starts at $6.

Fujitsu
www.fujitsu.com

See Associated Figure

About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form. 

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below. 

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.  

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence. 

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!