512 Kb Serial EEPROMs Are I2C Compatible

April 1, 2003
Announced as an industry first, the company has squeezed a 512 Kb, I2C compatible serial EEPROM into an eight-pad, dual flat no-lead (DFN) package measuring 6 mm x 5 mm. The 24LC512, 24AA512, and 24FC512 EEPROMs employ a proprietary PMOS electrically

Announced as an industry first, the company has squeezed a 512 Kb, I2C compatible serial EEPROM into an eight-pad, dual flat no-lead (DFN) package measuring 6 mm x 5 mm. The 24LC512, 24AA512, and 24FC512 EEPROMs employ a proprietary PMOS electrically erasable cell (PEEC) process technology that renders packages measuring just 0.9 mm thick. The devices are also available in eight-lead PDIP, eight-lead SOIC, and 14-pin TSSOPs. Each device has a page-write capability up to 128 bytes and can perform random reads throughout the entire array. Their address lines allow up to eight devices on the same bus for a maximum of 4 Mb of total address space. Additional features include a write time of 5 ms, 400 KHz clock rate across their operating voltage range of 2.5V to 5.5V, up to 1,000,000 erase/write cycles at 85°C, data retention up to 200 years, and an operating temperature range from –40°C to +85°C. The 24FC512 operates at a bus speed of 1 MHz over the same voltage and temperature range, and the low-voltage 24AA512 operates on 1.8V to 5.5V. Pricing for the 24LC512 and 24AA512 is $1.83 each/10,000 and for the 24FC512 is $1.88 each/ 10,000. MICROCHIP TECHNOLOGY INC., Chandler, AZ. (480) 792-7668.

Company: MICROCHIP TECHNOLOGY INC.

Product URL: Click here for more information

Sponsored Recommendations

The Importance of PCB Design in Consumer Products

April 25, 2024
Explore the importance of PCB design and how Fusion 360 can help your team react to evolving consumer demands.

PCB Design Mastery for Assembly & Fabrication

April 25, 2024
This guide explores PCB circuit board design, focusing on both Design For Assembly (DFA) and Design For Fabrication (DFab) perspectives.

What is Design Rule Checking in PCBs?

April 25, 2024
Explore the importance of Design Rule Checking (DRC) in manufacturing and how Autodesk Fusion 360 enhances the process.

Unlocking the Power of IoT Integration for Elevated PCB Designs

April 25, 2024
What does it take to add IoT into your product? What advantages does IoT have in PCB related projects? Read to find answers to your IoT design questions.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!