- Practical Advice on Running uClinux on Cortex-M3/M4
- Cortex-M4 Kit For Getting Started With Mobile Sensor Apps
- High Efficiency Cortex-M4 MCUs Consume Less Power
Cypress Semiconductor's PSoC 4 brings the Cortex-M0 to the PSoC family delivering low cost, 32-bit processing power with customizable peripherals (see figure). It complements the original PSoC and the 8051-based PSoC 3 family (see PSoC Development Hardware). It also has an upgrade path to the PSoC 5 family based on the Arm Cortex-M3 processor.
The PSoC family is based on configurable digital and analog peripherals that can be connected to almost any I/O pin providing a designer flexibility only exceeded by an FPGA. Customizing the PSoC peripherals using PSoC Creator is significantly easier than programming an FPGA. Typically a developer will select from a large set of predefined peripherals and simply configure settings as necessary and link the logical I/O to physical ports.
The PSoC 4 a 12-bit SAR ADC with a 1 Msample/s rate. It has zero-overhead sequencing and can handle differential configurations. The analog support can also constructs DACs. Other components in the configurable analog interface include op amps, comparators and precision voltage references. Cypress' CapSense capacitive touch support is also available with the platform. This includes the SmartSense auto-tuning feature.
The analog components can be combined with the configurable digital components to handle complex applications such as motor control by offloading the processor. The digital components can be used to build a range of devices like specialized serial communication interfaces. There are some hard core interfaces such as SPI, I2C and UARTs that are available as well. LCD support is optional.
Low cost and low power are where the PSoC 4 excels. It uses 20 nA in the lowest power, stop mode. SRAM can be maintained in the low power sleep mode using only 150 nA.
The PSoC 4 is going to give the PSoC 3 some major competition. Existing designs will likely stay on the 8051 platform but new designs will take advantage of the 32-bit platform and the migration path to the PSoC 5.