LabView Inside Smart Video

Aug. 31, 2007

It’s real but not quite a product yet but National Instrument’s NI-1742 Smart Camera was on display at NI Week. Intelligent cameras like this are not new but ones that run LabView applications on the camera are.

William G. Wong

Though not quite a product yet, National Instrument’s NI-1742 Smart Camera was on display at NI Week. Intelligent cameras like this aren't new, but those that run LabView applications are. The Smart Camera houses a 533 MHz PowerPC processor with 127Mbytes of RAM and 128 Mbytes of flash. It can run LabView applications and Vision Builder, and communicates with the outside world using dual Gigabit Ethernet interfaces. The camera has a connector on the front for driving lighting controls typically required for process control and image recognition. It can deliver up to 1A in strobe mode. An LED ring can be mounted around the camera lense. There are opto-isoluated IO ports and an RS-232 interface, as well as encoder support for rotating coordination. The system has a monochrome VGA resolution CCD that supplies images up to 60 frames/s, but color will be an option in the future. There is partial scan and binning support. In the past, combining LabView with a camera also required a PC or CompactRIO platform. Now an application can fit into the camera itself. Related Links National Instruments

About the Author

William G. Wong | Senior Content Director - Electronic Design and Microwaves & RF

I am Editor of Electronic Design focusing on embedded, software, and systems. As Senior Content Director, I also manage Microwaves & RF and I work with a great team of editors to provide engineers, programmers, developers and technical managers with interesting and useful articles and videos on a regular basis. Check out our free newsletters to see the latest content.

You can send press releases for new products for possible coverage on the website. I am also interested in receiving contributed articles for publishing on our website. Use our template and send to me along with a signed release form.

Check out my blog, AltEmbedded on Electronic Design, as well as his latest articles on this site that are listed below.

You can visit my social media via these links:

I earned a Bachelor of Electrical Engineering at the Georgia Institute of Technology and a Masters in Computer Science from Rutgers University. I still do a bit of programming using everything from C and C++ to Rust and Ada/SPARK. I do a bit of PHP programming for Drupal websites. I have posted a few Drupal modules.

I still get a hand on software and electronic hardware. Some of this can be found on our Kit Close-Up video series. You can also see me on many of our TechXchange Talk videos. I am interested in a range of projects from robotics to artificial intelligence.