High-Voltage Supplies Suit Photomultipliers

The Series B and Series C high-voltage power supplies incorporate a dynode driver for use with side- or front-window photomultipliers like the 931A and the IP28. Series B supplies generate an output of 0 to ­1250 V dc from an input of 0 to 9 V...
May 27, 2002

The Series B and Series C high-voltage power supplies incorporate a dynode driver for use with side- or front-window photomultipliers like the 931A and the IP28. Series B supplies generate an output of 0 to ­1250 V dc from an input of 0 to 9 V dc, with the output voltage varying directly with the amount of input voltage applied. Series C supplies provide ­500 to ­1250 V dc from an input of 12 to 15 V dc with the output set by a programming voltage or resistance. Both series feature integral voltage divider networks of approximately 5 MΩ, no bypass capacitors, an integral socket that fits all 28-mm diameter nine-stage photomultipliers with small-shell 11-pin bases, a low dc leakage socket, and an optional built-in signal preamplifier. Prices start at $95 for Series B and $158 for Series C with delivery of stock to 14 weeks.

HiTek Power
www.hitekpower.com; (619) 258-7700

About the Author

Sign up for Electronic Design Newsletters
Get the latest news and updates.

Voice Your Opinion!

To join the conversation, and become an exclusive member of Electronic Design, create an account today!