Tiny Package Houses Powerful 35-V, 3-A Boost DC-DC Converter

March 1, 2004
Don't be fooled by the small, 16-pin thin-shrink small-outline package (TSSOP) for the step-up LT3436 dc-dc converter. The device delivers a sizable punch—a 35-V output (within 2%) at 3 A. Its input voltage ranges from 3 to 25 V. Also, it can...

Don't be fooled by the small, 16-pin thin-shrink small-outline package (TSSOP) for the step-up LT3436 dc-dc converter. The device delivers a sizable punch—a 35-V output (within 2%) at 3 A. Its input voltage ranges from 3 to 25 V. Also, it can operate from single-cell lithium-ion (Li-ion) batteries up to fixed 24-V rails. As a result, only 0.9 mA of current (6 µA of quiescent current in the shutdown mode) is required, suiting it for applications in battery-powered systems, distributed power, portable computers, and DSL modems.

The LT3436's constant 800-kHz switching frequency of 800 MHz allows designers to keep switching noise out of phase-sensitive circuitry, and it enables the use of tiny capacitors and inductors. The 3-A maximum switch current remains constant at all duty cycles. Switching frequency can be synchronized 1 to 1.4 MHz via an external logic signal.

An on-chip 0.1-Ω,3-A switch includes all of the control circuitry needed for this current-mode converter with a low-dropout (LDO) regulator. Current-mode operation provides both fast transient response and good loop stability. The converter is designed to operate from −40°C to 120°C.

The LT3436 is available from stock, with pricing starting at $2.75 each in 1000-piece quantities.

Linear Technology Corp.www.linear.com (408) 432-1900

Sponsored Recommendations

The Importance of PCB Design in Consumer Products

April 25, 2024
Explore the importance of PCB design and how Fusion 360 can help your team react to evolving consumer demands.

PCB Design Mastery for Assembly & Fabrication

April 25, 2024
This guide explores PCB circuit board design, focusing on both Design For Assembly (DFA) and Design For Fabrication (DFab) perspectives.

What is Design Rule Checking in PCBs?

April 25, 2024
Explore the importance of Design Rule Checking (DRC) in manufacturing and how Autodesk Fusion 360 enhances the process.

Unlocking the Power of IoT Integration for Elevated PCB Designs

April 25, 2024
What does it take to add IoT into your product? What advantages does IoT have in PCB related projects? Read to find answers to your IoT design questions.

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!