Power Amp Boosts Output In 5-GHz 802.11a Products

Sept. 20, 2004
A new power amplifier for the 5-GHz band, which is used by the 802.11a wireless local-area network standard, is designed for access points, laptops, PCMCIA cards, and other devices using the 11a standard. Developed by SiGe Semiconductor,...

A new power amplifier for the 5-GHz band, which is used by the 802.11a wireless local-area network standard, is designed for access points, laptops, PCMCIA cards, and other devices using the 11a standard.

Developed by SiGe Semiconductor, the RangeCharger SE2534A three-stage linear power amplifier incorporates a power detector, analog biasing, and interstage matching circuits. It can produce up to 17.5-dBm output power with an error vector magnitude (EVM) of less than 3%. Such an EVM figure improves packet error rates, providing maximum data throughput simultaneously with maximum transmission range.

The chip's power detector adjusts the operating point to accommodate the peak-to-average power ratio, a key benefit in orthogonal frequency-division multiplexing systems. This feature also reduces overall power consumption. Typical current drain at 17.5 dBm is 160 mA.

The SE2534A comes in a 10-pin 5- by 5-mm LGA package. Available now, it costs $1.93 in 100,000-unit quantities.

SiGe Semiconductor Inc.www.sige.com See associated figure
About the Author

Louis E. Frenzel

Click here to find more of Lou's articles on Electronic Design. 

Sponsored Recommendations

Comments

To join the conversation, and become an exclusive member of Electronic Design, create an account today!